Bimmerfest - BMW Forums - View Single Post - Returning to the world of BMW ownership
View Single Post
  #11  
Old 07-01-2019, 11:34 AM
namelessman namelessman is offline
Officially Welcomed to the 'Fest
Location: northern california
 
Join Date: Dec 2004
Posts: 11,133
Mein Auto: bimmer
Quote:
Originally Posted by xras View Post
Don't have a picture but could get one if that helps but basically the rinse water stops at that line on the way down (and then makes it's way). I was expecting that there was either a deposit of plastic or a removal of clear coat (that's what it looks like) but I can't feel anything like that with fingers.
Start with the least abrasive polish/glaze, e.g. 3M hand glaze, and try to remove the deposit by hand first. This can be slow but if it does strip off the deposit(even very slight) this will be the preferred route with multiple applications.

Removing clear coat from rubbing against a plastic trash bin is possible but not unlikely.
Reply With Quote