help with secondary air system - Bimmerfest - BMW Forums

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > Z Series > E36/7 Z3 (1996-2002)

E36/7 Z3 (1996-2002)
E36/7 Z3 Roadster, Z3 coupe, Z3 M Roadster and Z3 M Coupe talk with our gurus here.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-01-2020, 05:19 PM
[email protected] dmytroa@telus.n is offline
Location: Kamloops, B.C.
Join Date: Mar 2009
Posts: 30
Mein Auto: 1998 z3
help with secondary air system

Long story short,1998 Z3 M52 2.8. Had intake manifold off, to replace oil separator, kind of slipped into it so didn't take pictures of the wiring. Also replaced fuel injectors, all 6 as one was leaking gas into cylinder and then backfiring when starting only. When reassembled, I had some of the wires switched, although it still started. Think I have the wires figured out. I'm getting a reading from the temp sensor, and the two other (2 wire ones, one for charcoal canister, and one for the SAS switch) are, i believe correctly connected, in any event switching them does not change anything!. Engine always starts on the third crank (it used to start right away), secondary air system does not engage at all, although checks out, both pump and valve are good. Pump runs when 12 volts supplied, vacuum switch tested manually switches on and off, electric vacuum switch not yet tested. No codes. Thinking its a blown fuse somewhere, but all fuses under hood check out, in any event there do not appear to be any fuses for charcoal canister vapour switch or secondary air vacuum switch. There is a reference in the fuse box to a 40 amp. fuse under the steering wheel, but can't find it.
Car runs flawlessly once started, seems to have more power, idles perfectly. I did "reset all adaptations" twice, once when the wiring was misconnected. Ideas please?
Reply With Quote

See More Related BMW Stories

Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > Z Series > E36/7 Z3 (1996-2002)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -7. The time now is 07:42 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© 2001- VerticalScope Inc. All rights reserved.