6WB Retrofit - Coding Required - Page 3 - Bimmerfest - BMW Forums



Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > BMW Coding and Programming

BMW Coding and Programming
Discuss coding options and features on your BMW here.

Reply
 
Thread Tools Display Modes
  #51  
Old 12-07-2013, 01:15 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Quote:
Originally Posted by GDMERC View Post
Shawn, what code was that?
I took a picture of it after I found it and tested it:

Click image for larger version

Name:	6WB - Sport - HP Meter.jpg
Views:	1460
Size:	130.3 KB
ID:	411368

But I can't find where I wrote the FDL name down, so I will have to go back and figure it out again.

I will do it tonight or tomorrow and will post back.

I will also be looking for FDL Code for the digital speed speed display inside the Comfort / Comfort+ Mode as seen here above the needle base:

Click image for larger version

Name:	6WB_Digital.jpg
Views:	68409
Size:	92.9 KB
ID:	411371
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.

Last edited by shawnsheridan; 12-08-2013 at 10:54 PM.
Reply With Quote
Sponsored Links
Advertisement
 
  #52  
Old 12-07-2013, 01:22 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Quote:
Originally Posted by kaxasia View Post
Hi shown. If you can't make your 6wb how we can make our kombi coding :-( which one you have problem exactly

Sent from my C6903 using BimmerApp mobile app
Sorry, but I don't understand what you are asking here.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #53  
Old 12-07-2013, 01:41 PM
djsaad1 djsaad1 is offline
Officially Welcomed to the 'Fest
Location: Here
 
Join Date: Sep 2012
Posts: 1,401
Mein Auto: range rover
The digital speed is called bc speed, or something like that. Not by a computer right now
Reply With Quote
Sponsored Links
Advertisement
 
  #54  
Old 12-07-2013, 01:53 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Quote:
Originally Posted by djsaad1 View Post
The digital speed is called bc speed, or something like that. Not by a computer right now
No. This is different.

BC_DIGITAL_V enables the Digital Speed in the BC Cluster, controlled by the BC Stalk. I already have that FDL Coded and working fine.

The digital speed I am talking about is displayed inside the Speedometer Gauge at the base of the needle; not the BC Cluster.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.

Last edited by shawnsheridan; 12-07-2013 at 01:54 PM.
Reply With Quote
  #55  
Old 12-08-2013, 11:14 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Quote:
Originally Posted by shawnsheridan View Post
i took a picture of it after i found it and tested it:

Attachment 411368

but i can't find where i wrote the fdl name down, so i will have to go back and figure it out again.

i will do it tonight or tomorrow and will post back.
I went back and tested this, and the FDL Code is MOTORLEISTUNG_ENABLE = aktiv to enable it. The meter scale units can be changed from kW to HP from the iDrive Settings menu:

Click image for larger version

Name:	Image 004.jpg
Views:	1344
Size:	68.7 KB
ID:	411623 Click image for larger version

Name:	Image 005.jpg
Views:	1364
Size:	75.4 KB
ID:	411624

Even when I changed it to HP, it still showed a digital readout of 80, unlike this picture below that is showing 480:

Click image for larger version

Name:	9495530413_27457cb5c0_c.jpg
Views:	1456
Size:	119.2 KB
ID:	411621

In all cases, it does not appear to be working because it is always maxed out with little or zero RPM's.

Quote:
Originally Posted by shawnsheridan View Post
i will also be looking for fdl code for the digital speed speed display inside the comfort / comfort+ mode as seen here above the needle base:

Attachment 411371
The code for this one is DIGITAL_TACHO_ENABLE:

Click image for larger version

Name:	Image 002.jpg
Views:	1274
Size:	69.6 KB
ID:	411620 Click image for larger version

Name:	Image 001.jpg
Views:	1354
Size:	70.8 KB
ID:	411619 Click image for larger version

Name:	Image 003.jpg
Views:	1437
Size:	55.9 KB
ID:	411622

It can be set for either mph or kmh and is independent of the main speedometer's unit of measure as shown in the picture with the main speedometer in mph, and the digital speed in kmh.

It is a nice addition to the Comfort / Comfort+ display, but redundant on the Sport / Sport+ display.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #56  
Old 12-09-2013, 06:29 AM
djsaad1 djsaad1 is offline
Officially Welcomed to the 'Fest
Location: Here
 
Join Date: Sep 2012
Posts: 1,401
Mein Auto: range rover
I do think the meter scale is dependent on certain engines, but it also didn't work for me when I accidentally fdl coded it on 50.3. It showed the same thing you are getting now. When I added the msport edition vo code and changed to a newer date on 51.1it then worked by vo coding.

I didn't know what the fdl code was so I didn't try to fdl code it on 51.1.

Actually now that I think about it, my kombi is still on 50.3. The rest of my car is on 51.1. I still haven't gotten a chance to flash my 6wb yet.

Last edited by djsaad1; 12-09-2013 at 06:38 AM.
Reply With Quote
  #57  
Old 02-09-2014, 02:56 AM
kinko kinko is offline
Registered User
Location: tokyo
 
Join Date: Feb 2014
Posts: 11
Mein Auto: F01
Hello.
6wb retrofit was carried out.
Nav guidance is not displayed on a screen and HUD.
What is a cause?
09 year 750i
Reply With Quote
  #58  
Old 02-09-2014, 02:58 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Did you code CIC to tell it car has new Kombi High?
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #59  
Old 02-09-2014, 03:42 AM
kinko kinko is offline
Registered User
Location: tokyo
 
Join Date: Feb 2014
Posts: 11
Mein Auto: F01
Quote:
Originally Posted by shawnsheridan View Post
Did you code CIC to tell it car has new Kombi High?
Yes. It carried out. It is normal except the Navi guidance. If there is a code on which the Navi guidance is displayed, please let me know.
Reply With Quote
  #60  
Old 02-10-2014, 02:46 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Not that I know of.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #61  
Old 02-10-2014, 03:53 AM
kinko kinko is offline
Registered User
Location: tokyo
 
Join Date: Feb 2014
Posts: 11
Mein Auto: F01
Quote:
Originally Posted by shawnsheridan View Post
Not that I know of.
Or [ having made the mistake in the CIC code ]? The CIC code was changed how?
Reply With Quote
  #62  
Old 02-10-2014, 04:01 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Sorry, I do not understand your question.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #63  
Old 02-10-2014, 04:21 AM
kinko kinko is offline
Registered User
Location: tokyo
 
Join Date: Feb 2014
Posts: 11
Mein Auto: F01
Quote:
Originally Posted by shawnsheridan View Post
Sorry, I do not understand your question.
I'm sorry.
What is the code of coding of HU_ClC?
Reply With Quote
  #64  
Old 02-10-2014, 07:46 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
It needs to match your actual Kombi:

Click image for larger version

Name:	Image 001.png
Views:	1244
Size:	6.0 KB
ID:	421833
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.

Last edited by shawnsheridan; 02-10-2014 at 07:48 AM.
Reply With Quote
  #65  
Old 02-11-2014, 04:34 AM
kinko kinko is offline
Registered User
Location: tokyo
 
Join Date: Feb 2014
Posts: 11
Mein Auto: F01
Quote:
Originally Posted by shawnsheridan View Post
It needs to match your actual Kombi:

Attachment 421833
Thank you. it tries -- mid and low.

My car. FA to build a date in 1112. ok?

Last edited by kinko; 02-11-2014 at 07:30 AM.
Reply With Quote
  #66  
Old 02-12-2014, 12:26 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Quote:
Originally Posted by kinko View Post
Thank you. it tries -- mid and low.

My car. FA to build a date in 1112. ok?
It should be fine. I used 1211 in my VO when I VO Coded mine.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #67  
Old 02-19-2014, 03:30 PM
ejs lt ejs lt is offline
Registered User
Location: Lithuania
 
Join Date: Feb 2014
Posts: 4
Mein Auto: E32 M60B30
Hello everyone,
I have a problem while retrofitting 6WB into F07
First of all sorry for the long post...

So, I'm using:
ICOM connected by Ethernet
E-sys 3.23.4 and E.25.3 with psdz 51.3
6WB with already cleared odometer and VIN
F07 I-step ship.: F001-09-08-532
What I'm doing:
connect to car
read FA, save FA, edit FA (adding 6WB and changing ZeitKrit. to 1112 (also tried 0312, 0712))
again save FA, go back to TAL-calculating, activate edited FA

Read SVT, save SVT
Load saved SVT (I think this step is not needed)
Select "Calculation Strategy" to "Complete Flash"
Select I-Step ship. to F001-XX-XX-XXX
I-Step target is already F001-13-11-504
Calculate
HW-IDs from actual SVT (also tried skipping this step)
Save new SVT

Calculate TAL
Execute TAL

Deselect All
select DKOMBI blFlash, swDeploy, cdDeploy, ibaDeploy
"Check Software availability" - might be, that I forgot this step, but, as I understand, this function only "Checks". Later, without a car, I tried to check sw availability and got "OK ...." message, so that's OK.
I tried to do the job with these Zeitkriterium: 1112, 0312, 0712
also with these F001-xx.. I-Step ship. and got the following results:
10-09-500, 12-03-500, calculated SVT includes KOMBI, so TAL suggests me to replace DKOMBI to KOMBI. OK, increasing I-Step ship...

12-07-510 - 12-11-501: I get this error when calculating SVT:
Code:
com.bmw.esys.domain.psdz.PsdzException: Generating target SVT with strategy complete flash and integration level "F001-13-11-504" (target) and "F001-12-11-501" (shipment) failed. [C324]
	at com.bmw.esys.domain.psdz.Psdz.generateSollverbauungGesamtflash(Psdz.java:759)
	at com.bmw.esys.domain.svt.SvtLogic.generateSvtTargetFromModel(SvtLogic.java:269)
	at com.bmw.esys.gui.svt.SvtCompareController.generateSvt(SvtCompareController.java:631)
	at com.bmw.esys.gui.svt.SvtTargetView$GenerateTargetSvtAction.doActionPerformed(SvtTargetView.java:408)
	at com.bmw.esys.gui.AbstractView$AbstractGuiProgressAction$1.init(AbstractView.java:425)
	at com.bmw.esys.gui.component.DialogProgress$2.construct(DialogProgress.java:152)
	at com.bmw.esys.gui.component.SwingWorker$2.run(SwingWorker.java:145)
	at java.lang.Thread.run(Unknown Source)
Caused by: KIS error: Die Werksverbauung enthält an der Diagnoseadresse 0x39 mehrere 100%-BNTN [010000003F040500, 08000003B5140501, 0600000312050000, 08000003B6140501, 08000003B7140501].
Timestamp: Wed Feb 19 18:30:47 EET 2014
ErrorCategory: SYSTEM_ERROR ID: 1283
Class: com.bmw.psdz.vehicle.softwarelogistik.kis.SollverbauungGenerator
ExecutionContext={category=KIS, ecuid=(UNKNOWN,?)}
	at com.bmw.psdz.vehicle.softwarelogistik.kis.SollverbauungGenerator.generateSollverbauungGesamtflash(SollverbauungGenerator.java:596)
	at com.bmw.psdz.vehicle.softwarelogistik.bf.SollverbauungsGeneratorBF.generateSollverbauungGesamtflash(SollverbauungsGeneratorBF.java:64)
	at com.bmw.psdz.uc.LogicImpl.generateSollverbauungGesamtflash(LogicImpl.java:726)
	at com.bmw.psdz.api.impl.bf.LogicBF.generateSollverbauungGesamtflash_aroundBody70(LogicBF.java:255)
	at com.bmw.psdz.api.impl.bf.LogicBF.generateSollverbauungGesamtflash_aroundBody71$advice(LogicBF.java:67)
	at com.bmw.psdz.api.impl.bf.LogicBF.generateSollverbauungGesamtflash(LogicBF.java:1)
	at com.bmw.esys.domain.psdz.Psdz.generateSollverbauungGesamtflash(Psdz.java:753)
	... 7 more
as I understand, NewFA and selected I-Step does not like ICM-V[39] module. So, increasing I-Step...

12-11-503 - 13-07-500: SVT calculation runs fast, then in new SVT I could found only these modules: 4x RK, TV MODUL, VSW
In calculated TAL to all other modules (also to DKOMBI) are given job hwDeinstal. Nevertheless I select everything as needed (blFlash...) and start this TAL. Everything goes in a minute (without flashing) and E-sys writes new VCM to car. After that I'm restoring original FA FP to car.
Any ideas? I cannot find what I'm doing wrong.
Is there any way to directly flash/reflash ecu like in a good old WinKFP with any PN?
EDIT: OK, it should be possible by manualy editing TAL. So how could I determine, which HWAP is needed by my ecu, if it is HWAP_FFFFFFFF_255_255_255, or I could skip this step.
On the other hand, in that way I could flash DKOMBI - write VIN into it, but my DKOMBI will be left outdated with unknown CAFD...

P. S.
My "new" DKOMBI info:
production date (Hestelldatum) 04.02.11
programming date 30.03.11
BTLD_00001057_002_002_000
CAFD_00001060_001_000_003 <- this CAFD does not exist in 49.4 and 51.3 versions
FLSL_0000105F_002_002_003
HWAP_FFFFFFFF_255_255_255 <- is it normal?
HWEL_00001058_001_000_000
HWEL_00001059_001_000_000
SWFL_0000105A_002_002_003
SWFL_0000105B_002_002_003
SWFL_0000105C_002_002_003
SWFL_0000105D_002_002_003
SWFL_0000105E_002_002_003

----------------------------------------------------------------------------------------------
Conclusion.
As I know another master was able to start flashing procedure after writing new VIN to DKOMBI's EEPROM. Nevertheless flashing procedure was failing.
At the end this DKOMBI is not retrofited to the car.

Last edited by ejs lt; 04-20-2014 at 02:02 PM. Reason: Conclusion
Reply With Quote
  #68  
Old 02-19-2014, 04:11 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
No, HWAP_FFFFFFFF_255_255_255 is not normal. This means it is corrupt. It usually happens due to inadequate voltage / loss of power while flashing.

Was this 6WB new (virgin) or used kombi?
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #69  
Old 02-20-2014, 02:29 AM
ejs lt ejs lt is offline
Registered User
Location: Lithuania
 
Join Date: Feb 2014
Posts: 4
Mein Auto: E32 M60B30
Quote:
Originally Posted by shawnsheridan View Post
No, HWAP_FFFFFFFF_255_255_255 is not normal. This means it is corrupt. It usually happens due to inadequate voltage / loss of power while flashing.

Was this 6WB new (virgin) or used kombi?
This 6WB is used, but it looks like that it was used for development or testing. It does not have any warranty labels outside, also I found inside ticks on the processors with hand-written numbers.
I haven't reached flashing procedure yet. These sw and app versions also could be read with INPA, so dkombi is not dead. Otherwise I use 45A power supply while flashing.
Also I noticed, while 6WB is connected on the bench, only background light comes up (after button press), but screen is black. In the car this screen comes up.

Last edited by ejs lt; 02-20-2014 at 02:33 AM.
Reply With Quote
  #70  
Old 02-20-2014, 06:47 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Used Kombi isn't just Plug-N-PLay. Far from it. First you need to use an EEPROM Programmer and blank the VIN and Mileage on the EEPROM, and then you need to flash it to write the car VIN to it.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #71  
Old 02-20-2014, 07:28 AM
ejs lt ejs lt is offline
Registered User
Location: Lithuania
 
Join Date: Feb 2014
Posts: 4
Mein Auto: E32 M60B30
Quote:
Originally Posted by shawnsheridan View Post
Used Kombi isn't just Plug-N-PLay. Far from it. First you need to use an EEPROM Programmer and blank the VIN and Mileage on the EEPROM, and then you need to flash it to write the car VIN to it.
I've desoldered and checked EEPROM. Mileage was blanked to 00, and All other data were already FF.
I am unable to flash dkombi...
Reply With Quote
  #72  
Old 02-22-2014, 06:24 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Why can't you flash DKombi?
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #73  
Old 02-22-2014, 03:08 PM
ejs lt ejs lt is offline
Registered User
Location: Lithuania
 
Join Date: Feb 2014
Posts: 4
Mein Auto: E32 M60B30
Thumbs up

I cannot calculate valid Target SVT for this car because of several problems mentioned above.

I think, that it is possible to create custom TAL for flashing, but:
-I don't know DKOMBI's HWAP;
-I never tried to create custom TAL and flash ecu with it;
-current E-sys version can't code this dkombi because of unknown CAFD, so, I think, it also will not have BTLD and FLSL. And I don't studied yet how to determine, which firmware belongs to specified hardware in E-sys.

Nevertheless, yesterday another person also tried to code/flash dkombi with no success.
Currently this dkombi was given to service which works on instrument clusters. So we are waiting for an answer.
Reply With Quote
  #74  
Old 02-22-2014, 03:22 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is online now
bimmerfest Supporting Member
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 36,217
Mein Auto: 2016 650i GC M-Sport
Ok. Good luck!
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Reply With Quote
  #75  
Old 03-23-2014, 08:23 AM
greicioforma greicioforma is offline
Registered User
Location: Kaunas
 
Join Date: Mar 2014
Posts: 3
Mein Auto: F10
shawnsheridan,

i hava 2010 f10 pre lci with standart cluster no 6WA.
If i will buy new one 6WB, install process will be same like yours or without 6WA it will be more problems?
thanks for info !




Quote:
Originally Posted by shawnsheridan View Post
I finally got around to installing my 6WB MFID Instrument Cluster.

Since mine was a brand new virgin Kombi, no EEPROM work was necessary to blank the donor car's mileage and VIN. Install was a breeze, and Coding was just a matter of adding 6WB to the VO, changing VO Production date to 1211, and VO Coding DKombi and HU_CIC.

Since my car does not have ECO Pro, I get just the Comfort and Sport mode displays.

Upgrading from the basic Kombi to either 6WA or 6WB is a dramatic improvement, and worth every penny. If I already had 6WA though, I personally would stick with it rather than invest in 6WB.

Attachment 379892

Attachment 379893

Attachment 379894

Attachment 379895

Attachment 379896
Reply With Quote
Reply

See More Related BMW Stories


Forum Navigation
Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > BMW Coding and Programming
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 05:26 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
© 2001- VerticalScope Inc. All rights reserved.