95 325i bad DME
Hi guys it's me again, so about 6 months ago i bought a non running 1995 325i auto that had a wet DME, when i got it it had a red bosch 413 in it (car was built 02/1995 so should be silver 413 with EWS II) so anyways the guy i bought it from said the DME was dead so i went on eBay and got a new red 413, plugged it aaaand nothing at all, engine cranked fuel pump didn't turned on, i had no spark and no injector pulse plus no check engine light, so i continued to diagnose it i found out that the crank sensor was bad so i got a new one, then the crank sensor wires were cut so i repaired them (made no difference) found out that almost all of the pins in the DME connector were loose i pushed them back into place and still nothing, DME has a good relay i got battery power at the connector i have communication with a scanner.
Long story short I'm stumped and i can't find why it doesn't work.
Additional information: i have 3 DMEs the red 413 that came with the car a new red 413 and a turner chipped silver 413, crank sensor is new and OEM and battery is good.
Anyways thanks a lot hope you can help this newbie out