All BMWs IHKA 801222 - missing DDE/DME release - potential solution - Bimmerfest - BMW Forums



Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > BMW Coding and Programming

BMW Coding and Programming
Discuss coding options and features on your BMW here.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-11-2019, 12:12 PM
Breach Breach is offline
Officially Welcomed to the 'Fest
Location: EU
 
Join Date: Jul 2011
Posts: 168
Mein Auto: F10
IHKA 801222 - missing DDE/DME release - potential solution

I'm posting this to save other folks from wasting time. For couple of years now my car has been constantly logging this error in the IHKA ECU:

801222 - Air conditioning compressor: switch off due to missing DDE/DME release

No other symptoms, and that's not even a fault - it's an info event. But I'm anal about these things, so it was quite annoying.

Normally, this fault indicates that DDE/DME did not allow the AC compressor to run because of engine load - temperature conditions, etc. In my case, I was getting this error even with a cold engine start, so the description didn't make any sense. I did a lot of googling but no solution - many people say it's normal, many cars have it, etc.

I think I fixed it, at least in my case ;-) I was having nothing better to do, so I was browsing through TIS and noticed that after IHKA programming/encoding the Steering Wheel Normalization ABL has to be executed. What does IHKA have to do with the steering wheel you may ask? No idea. Did I program/encode IHKA via e-Sys, thus not running the post operations ISTA would? Yes I did. So, i ran the service function and no error for more than a week now! Thus, I am 99% sure it's fixed, as I was getting the fault instantly before.

Of course, in other cases it may be an actual AC problem, just sharing my experience.

Hope that's useful to someone.
Reply With Quote
 

See More Related BMW Stories

Tags
801222, ihka


Forum Navigation
Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > BMW Coding and Programming
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© 2001- VerticalScope Inc. All rights reserved.