BimmerFest BMW Forum banner
Add bookmark
Buttoned up

Buttoned up

  • 0
  • 0
Driver's side bumper trim being seated.

Driver's side bumper trim being seated.

  • 0
  • 0
Driver's side vent removed/installed.

Driver's side vent removed/installed.

  • 0
  • 0
Push pin connector being removed.

Push pin connector being removed.

  • 0
  • 0
Passenger side vent trim. Plastic push pin connector shown.

Passenger side vent trim. Plastic push pin connector shown.

  • 0
  • 0
Passenger side vent trim removed/installed.

Passenger side vent trim removed/installed.

  • 0
  • 0
Torque to 22 ft lbs on assembly. Some antiseize is a good idea.

Torque to 22 ft lbs on assembly. Some antiseize is a good idea.

  • 0
  • 0
Torx T50 needed to remove the bumper bolts.

Torx T50 needed to remove the bumper bolts.

  • 0
  • 0
Both bumper bolts are accessed as seen once the plastic vent trim is removed.

Both bumper bolts are accessed as seen once the plastic vent trim is removed.

  • 0
  • 0
The two bolts are the primary fastener of the bumper to the car.

The two bolts are the primary fastener of the bumper to the car.

  • 0
  • 0
Driver's side bumper, vent trim removed, brake and alternator cooling vents need to mate into the ductwork in the fender. (chicken wire seen is to ke

Driver's side bumper, vent trim removed, brake and alternator cooling vents need to mate into the ductwork in the fender. (chicken wire seen is to ke

  • 0
  • 0
Remove the headlights, or at least loosen enough for bumper to seat under the lights.

Remove the headlights, or at least loosen enough for bumper to seat under the lights.

  • 0
  • 0
Bumper installed on passenger side first. Driver's side still needs to be seated.

Bumper installed on passenger side first. Driver's side still needs to be seated.

  • 0
  • 0
Plastic connector visible here (black - Looks like a vertical running track, huge cigar cutter, whatever) which the bracket attached to the bumper sli

Plastic connector visible here (black - Looks like a vertical running track, huge cigar cutter, whatever) which the bracket attached to the bumper sli

  • 0
  • 0
Before disconnect.

Before disconnect.

  • 0
  • 0
The connector for the headlight washer hose.

The connector for the headlight washer hose.

  • 0
  • 0
Disconnect/reconnect the fog lights. Squeeze the connector near the wrie to release (std procedure but trickly if having to balance/hold the bumper).

Disconnect/reconnect the fog lights. Squeeze the connector near the wrie to release (std procedure but trickly if having to balance/hold the bumper).

  • 0
  • 0
Front bumper pulls straight forward and off.

Front bumper pulls straight forward and off.

  • 0
  • 0
Suspend the headlight washer hose to eliminate syphoning.

Suspend the headlight washer hose to eliminate syphoning.

  • 0
  • 0
N

front bumper removal

There are no comments to display.

Album information

Album owner
Neversaynever
Date created
Item count
19
View count
6
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

N

Neversaynever

Media items
20
Albums
2
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top