Cant edit in esys?

crash88 · Oct 24, 2019

I have problem in esys,cant edit,why?

Maxwell4321 · Oct 24, 2019

because you are using esys without launcher

gugin · Oct 24, 2019

Are you sure? The screenshot shows that he is in FDL editor. When I first tried E-Sys without Launcher, I don't think I was even able to get to the FDL editor; it asked me for a token. But it's been a long time, so I may misremember.

gugin · Oct 24, 2019

Correction: You are trying to edit the wrong entry. You need to edit the function data line under Ausgelesen. The line you highlighted simply tells you that the nominal term "aktiv" translates into value 01. That is given by BMW; you cannot change that.

crash88 · Oct 25, 2019

Need me to change this ST_ECAL_TIMEOUT to nicht_aktiv, so, where then to set that to nicht_aktiv, in Ausgelesen? This is first time to use esys, sorry becouse dont know

maaii · Oct 25, 2019

Hi Sir

If you just want to change FDL code, you can try to use Bimmercode on expert mode. It's much easy to use.

crash88 · Oct 25, 2019

I want to disable ATM (telematics ecu), try with bimmercode but when disable telematic ecu, tap on CODE, but on 35% stop and give me error.Just to know, ATM is fitted out of car, and now have error on dashobard (emergency call not avaliable),and on ISTA cant delete fault and telematic module is RED

maaii · Oct 25, 2019

Ok, so that is new problem on telematics ecu. I don't know how to debug issue. Sorry

crash88 · Oct 25, 2019

just want, is possible, to delete telematics ecu like if didn't even exist (becouse telematic module is fitted out of car), or to delete emergency call not avaliable error on dashboard

Cant edit in esys?

Attachments

Top Contributors this Month

Recommended Communities