Hi everyone. i have an e61 lci at my workshop where im stuck with "5E4E - Raddrehzahlfuehler Vorne Rechts: Signalflanke fehl (RDF-Typ 11i) in german. ive changed speedsensor, to new genieue bmw one, and changed the wheel bearing aswell as the dsc module (complete with abs block) and ive...

HI I have a 335i 2008 that is trowing the codes 5df0 hydraulic unit pump motor and 5df1 hydraulic unit pump motor connector faulty. Repair shop wants $3500 to replace it, YIKES! And they say they can't replace the pump without buying the module, but the module can be repaired as explained...

My 95 740i is having an issue with the ABS. I've read so many threads but thought I'd reach out just the same to get some advice. When I first start up the car and drive it, I step on the brake pedal and its like stepping on rocks. The pedal pulsates forcing my foot to press harder to stop...

Hello to all, I did a front brake job on my 98 528i two weeks ago and since doing it I have been having an issue with my ABS warning light coming on and immediately deactivates the ASC. Completely intermittent, comes and goes. I do know the new brake sensor is not working as I still have brake...

I have a 99 528i and the speedo doesn't work all of the time. I took some advice from the forum, and replaced the lr speed sensor, it worked great for about 75 miles, but the abs, trac control light was still on. What should I do next?? Thanks, Tim

Have 96 328iC replaced ABS controller-cleared codes but now have ABS error code 24- right rear outlet valve fault. We could not find any additional information on this error-possibly a dealer code?

1999 540i 85K miles. Sent my ABS module to a rebuilder. Rebuilder calls me and says Error Code 23 and there is a 50-50 chance it will perform after rebuild. I told them to hold off until I do research. According to Max_VQ (Thanks!) error code 23 is --> 23 Incorrect Coding - ABS/ASC module...

Hi, I posted a couple of questions on here about the intermittent ABS light problem I was having. First I figured that one of my sensors was bad, so I began by cleaning and changing the sensors to try and isolate the bad one, to no avail. :mad: With the dealer wanting to charge 130 dollars to...