BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. E46 (1999 - 2006)
    Hi, I've got a problem recently with my BMW e46 320d automatic. It's related with the ABS system, that for some reason the ABS light on the dashboard starts to blink when I turn the key in position (when it finish to check everying), even when I startup the car. I must admit that this problem...
  2. BMW Coding and Programming
    I'm posting this because I've seen alot of conflicting information on the subject. It looks like I'm going to have to buy a new abs module because when I sent mine in for repair the solenoids were knocked out of place. I'm not interested in spending 3 grand on a new one from the dealer because...
  3. X5 E53 (1999 - 2006)
    Greetings enthusiasts, I am in desperate need of finding an ABS module (both the electric and hydraulic) for my 2003 4.6is. My mechanic has unsuccessfully purchased 7 used and rebuilt ones and none of them has been able to be coded properly. This has been going on for the better part of a year...
  4. 3 Series & 4 Series
    Urgent help needed! ABS Pressure Sensor 5E20 Hi all I have a BMW 320i m sport, 2007 e92. Ive had the rear right ABS sensor fault come up for a long time now, and the dreaded 5E20 ABS Pressure Sensor 1 electrically defective. I have replaced the ABS sensor, faults gone happy days.. i also...
  5. E60 / E61 (2004 - 2010)
    Hi, Can anyone help me with this fault code. I can't seem to figure out what is wrong. I have a 520D yr 2008. My mechanic put in a second hand ABS but the fault code didn't disappear.
  6. E63 / E64 6 Series (2004 - 2010)
    Hello everyone. I have a 2004 645ci and a problem with the active steering. The previous owner replaced the steering angle sensor and I had it reinitialized and of course that didn't solve the problem. The weird thing is when the active steering fails, I also get the DSC and emergency brake...
  7. 7 Series - E65 / E66 (2002 - 2008)
    Hello everyone, This is my first post. I wished that I could give a very informative DIY information for repairing a bad ABS module. Long story short, I failed. Here is what I have done and why I failed. Hope you guys can learn something from my failure and save tons of money and time...
  8. E60 / E61 (2004 - 2010)
    My ABS module has been diagnosed as having failed on my 2007 530xi. I'm struggling with either buying a $100 used module and having it programmed for $165 or having mine rebuilt for $300 at MM. My preference is going the MM route but the post I read recently haunts me. It was from a...
  9. E39 (1997 - 2003)
    Hey guys im hoping you can help me. I have a 5/00 528i/A with 105k miles on it. The car is in beautiful condition mechanically and aesthetically except one problem, I have the trifecta lights along with the speedo not working. So this is usually what happens. I'll start it up and drive to work...
  10. E39 (1997 - 2003)
    I'll just start with some background info. I found a 1999 bmw 528i on Craigslist. I went to check it out and the check engine light was on along with the traction and abs light I scanned the car with a obd2 and P0500 came up as a fault. I thought ok no big deal it's just a speed sensor. The...
  11. E39 (1997 - 2003)
    Ive read tons of stuff on here but im still a bit confused on how to diagnosis my P0500 code My smog is due and my check engine light was on. I scanned the car and the P0500 code showed up. So what i did was remove the speed sensors and clean them up with crc to restore some conection. My...
  12. E36 (1991 - 1999)
    To start with I have a '96' 328iC with ABS only. I have spend time searching forums for info on ABS issues. My ABS light has been on since I have owned the car for 4 years. The dealer said he can't read the module and it needs a new brain @$2k. I purchased a used one on ebay (numbers match) but...
  13. E39 (1997 - 2003)
    1999 540i 85K miles. Sent my ABS module to a rebuilder. Rebuilder calls me and says Error Code 23 and there is a 50-50 chance it will perform after rebuild. I told them to hold off until I do research. According to Max_VQ (Thanks!) error code 23 is --> 23 Incorrect Coding - ABS/ASC module...
1-13 of 13 Results
Top