Search Results for ‘beam’

Hi! I bought my first BMW this summer, a X3 2.0d 177Hp, 2008, 250k km. New battery this year. The problem that appeared while driving, about one week ago, was the blue lamp indicating beam lights suddenly turned on (but not the beam light), and at the same time the right turn lamps (instrument...

Hi, Super confused about this one. When I turn the low beam headlights on. the light adjuster goes crazy and only the right indicator bulb lights up continuously. Main beams work and so do full beams. Both indicators work fine. I'm not sure if this is related but boot also doesn't open...

Hi, i have been looking around on how to code this high beam assistant, i was able to code it by doing the fallowing: FRM/3050/FLA_VERBAUT/aktiv FRM/3050/FLA_AUTO_AKTIV/automatisch HU_NBT/3000/HIGH_BEAM_ASSISTANT/aktiv KAFAS/3015/FLA_ON_OFF/aktiv But is not the "smart" high beam assistant that...

The headlights on the passenger side of my 2007 z4 went off. All lights in the casing: low bean, high beam and daylight ring are off. I checked the fuses but I don't think it's that anyways because they don't seem to be independent for each side. What else can it be? They're Xenon.

Hi, Let me start by saying sorry if this has been covered. I have spent many hours looking for a solution without any joy. So, I have a 2007 330i e93 with bi-xenon headlights on the outside and halogen bulbs on the inside. My frustration is the halogen bulbs do not seem to add any value other...

History: I have a 06 330i e90 and the passenger low beam malfunction error is on my iDrive along with the passenger low beam being out. The rest of the headlight works properly. Two months ago I had this issue, I replaced the ballas/control unit, the bulb, and the wire that connects those two...

Hey all. Got a 2006 bmw z4 roadster. My low beam xenon bulb went out after 6 years of use. Dealership wanted too much to replace it, so I made a video on how to do it yourself. Not sure where to post this information so feel free to repost in the proper thread. good luck:thumbup...

So hears the deal. Both my high and low beams wont work. I turn the lights on and the bulb to the right turns on like it always does but the actual head like doesnt turn on. Also when i pull the high beam leaver thing back and flash it....the high beam work then :-S im so confused with whats...

Took this picture the other night. Should the beam pattern look like this? I feel like the part where each light slopes up and over (like this: /-----) should be lined up on top of each other. I.e. so we have one cohesive beam which is brighter. Thoughts? thanks