BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. BMW Coding and Programming
    The expertmode profile is always named "default" once you install the INPA and NCS Expert. In order to code and program any bmw feature, you need to setup the so called "expertmode" profile so in this video I will show you how to set it up. In the video I revealed the password which is: REPXET I...
  2. BMW Coding and Programming
    Valvetronic system alouds your engine to reduce your “pumping” losses in low and mid range loads! From here you have more efficient fuel consumption and better emissions! This video’s purpose is to show you how my engine behaves with 0,3 mm minimum valve lift and 0,8 mm minimum valve lift! For...
  3. E60 / E61 (2004 - 2010)
    I am showing how to test your dynamic drive system, through scan tool Launch Diag x431 After any maintenance on the hydraulic steering system (oil change for example) has to be performed Dynamig drive zero calibration and startup test in order to poor the remainig air in the system and relearn...
  4. E60 / E61 (2004 - 2010)
    BMW Calibration of Steering angle sensor, using Launch Diag X431, that calibration has to be done after replacement or maintenance of Steering power rack, steering angle sensor or steering module. If is not calibrated DSC traction is not active and DSC warning lights comes On. For any BMW...
  5. E60 / E61 (2004 - 2010)
    Hi all. I want to share my experience with BMW coding. I have used scan tool Launch X431. Unlock all doors when car stops and turn off the engine” In order to code that option you need to access CAS module of your BMW and change it to ”enable” You can also change your preference if you whant the...
  6. E60 / E61 (2004 - 2010)
    Hello, On bmw e60 530i 2004 I got "Speedometer display malfunction" error showing up every time I start ignition and my digital speedometer always shows some number like 10-20km/h even car not moving. I suspect that this affect my fuel consumption numbers. What I hate tried to update DATEN...
  7. BMW Coding and Programming
    I have just started coding and had some success with enabling Sport displays and then over stepped. I decided to add a FA code to see if I could get enhanced bluetooth. WELL, I have managed to get myself into Instrument Cluster error, tire pressure warning, and many other errors. I did save...
  8. General BMW Questions
    https://www.youtube.com/watch?v=NTz_1AYDqUg In this BMW Explained learn how to access settings to select that exterior mirrors fold in automatically when your BMW is locked.
  9. BMW Coding and Programming
    Hi, I want to get into coding my BMW, for a while ive been trying to set up esys but can not find download links or a beginners guide anywhere. any help out there?
  10. BMW Coding and Programming
    Hi guys, I live in Turkey I Want to turn signal sidemarkers on with headlights on. My Car is 2016 320d LCI. Led headlights. Thanks in advance. Note: I tried these codes but it did not work. FEM_BODY MAPPING_SIDEMARKER_L_OUTPUT off fra_v_l FEM_BODY MAPPING_SIDEMARKER_L_PWM_STANDARD off 9V...
  11. BMW Coding and Programming
    After hours of research and finally getting my hands on a cable and the car that I'm wanting to code on (my cousin's), I finally managed to have a go at setting up the BMW Coding Tools with INPA and NCS Expert, but so far have had no luck getting either to work, even after three different...
  12. BMW Coding and Programming
    http://i180.photobucket.com/albums/x100/guatibiri/DSCF0687.jpg BMW and other automakers would rather not have you tinkering with your car's DME control computer. They justification being that changing the core operating parameters could result in accidents, injuries, death from unsafe driving...
1-13 of 13 Results
Top