BimmerFest BMW Forum banner

cam position sensor

  1. E60 / E61 (2004 - 2010)
    2006 525i n52 manual 6 speed has 198,000k. Been a great car. Recently been having a rough idle, specifically, when I'm at 45 mph and the light changes, ill pull it out of gear and coast to the light. The rpm dives to about 400 and then vibrates and kicks up to 1100 and then dives down again...
  2. E39 (1997 - 2003)
    hey does some have had cam shaft sensor errors , now i have tried 2 sensors but its stil the same. also thought there was one of the injector that ticked but I read that it's because it closes and opens the same time when the cam sensor does not work, and it's bad economy and it's slow and the...
  3. E39 (1997 - 2003)
    I just bought my first V8 (03 540i 6speed m62tu engine. I have owned multiple vehicles with m54. I am experiencing trouble that has never occurred to me before. So any help is appreciated! background: Got the car around Dec 14. Drove it home fine, though with common oil leak. so I figure I...
  4. 7 Series - E38 (1995 - 2001)
    Have a '97 740il. The car will turn over but won't fire. Tested my crank and cam sensors. Cam sensor read 625 ohms and Crank was at 622. I read a post that said the Bentley manual says they should be around 500 ohms +/- 10%. Will either of these cause my car not to start? Thanks. Sorry so short...
  5. 7 Series - E38 (1995 - 2001)
    My first bboard post! An engine code for this error showed up. There is a good (one handed) video on youtube showing how to check Ohms resistance on the top of the sensor. Wondering if there is a link or list experience for actually replacing the camshaft position sensor.
  6. E36 (1991 - 1999)
    I made this so I can ask for help with my proble I have a 1996 328is. Few days ago an engine code came up for my Cam Position Sensor But the car ran fine. Then the light went of and problems started. Rough idle, loss of power when I accelerate, weird sputtering at idle. I replaced the sensor...
  7. 7 Series - E38 (1995 - 2001)
    Hi Y'all, Anyone out in beemerland know why the ASC light would come on after replacing the MAF, Cam position sensor, and the ignition coil pack on cylinder 7. The rough idle problem is history since these changes but now she is having some issues with starting! I fired her up this AM, she...
  8. E46 (1999 - 2006)
    :confused:(Fault Codes - Post VANOS installation; cylinder misfire/intake cam) P0204 - Fuel injector circuit condition injector number 4 P0205 - Fuel injector circuit condition injector number 5 P0206 - Fuel injector circuit condition injector number 6 P1349 - Misfire cylinder 4 with fuel...
  9. E39 (1997 - 2003)
    Any help here will be very appreciated. I have a 528i built in 7.97 that started hesitating under acceleration and chirping when trying to start. The mechanic thought it was a coil pack so they were replaced , no change. Took out the MAF to find it was broken so bought one from Ebay (yeah I know...
Top