BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 16 Results
  1. Parting Out
    These came out of my 330 with 189,000 miles. Not pitting or such. They look smooth with no issues. Both cam's for $100 plus shipping. I can take more pics or video if needed just let me know.
    $100 USD
  2. E60 / E61 (2004 - 2010)
    If yes, what model? Looking for one that will cover my mirror symmetrically and still have cam exposed for recording. Also, would LOVE to have one that I could add a front bumper cam for a total of three cams (dash, front, backup) Thanks, / Dag /
  3. X3 E83 (2004 - 2010)
    X3 E83 N52 knocking rattle from head or engine/ running out of ideas I have 2006 X3 3.0 SI E86 N52 engine, I got some heavy rattling /knocking coming from the engine. Started out as a low rattle noise, sounded like kame from the oil filter cover. On my 30 min drive home got real bad. I...
  4. E36 (1991 - 1999)
    98 m3 pulling the p0340. Autologic 61 i think? Cam sensor signal IMPLAUSABLE. Cam sensor reading holds at 59° Code appears immediately at startup. Car symptom is just laggy power. Had 4 sensors run through from all brands including oem. Engine timed correctly, triple checked. Complete wiring...
  5. Tools and Miscellaneous
    I used this once, all of the pieces are included and are in perfect working order. $210 shipped
  6. X5 E53 (1999 - 2006)
    Hey guys, I'm new here and new to the BMW world I recently purchased a 2001 X5 with the 4.4 and it came with a P0011 code. I figured it was an easy fix, and replaced both cam position sensors and both VANOS solenoids. I tested the solenoids (after i installed them) and both are known good...
  7. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Hi All, I've just received a Roav Dash Cam for Christmas as a present. I attempted to hard wire the Dash Cam into the fusebox in the engine bay. The connector I have (LINK) is all working fine. However, when I try to close the lid on the fusebox there isn't enough room as the lid catches on the...
  8. E90/E91/E92/E93 (2006 - 2013)
    So it all started after a pull 10 months ago. My serpentine belt ripped and went inside the crank seal. We all know the deal when this happens. I got all the pieces out BESIDES the ones stuck in the oil pick up tube (I forgot.) A few months after, I would notice my car would go into limp mode at...
  9. E82 / E87 / E88 / F20 1 Series (2008 - 2014)
    Hi Guy's. This is my fist post so hi to all. This is a great site and from what I have read some very knowledgeable people sharing the love. Well done and thanks! My daughter has bought a 2008 120I convertible. Great little car but quickly developed a serious miss. I have tracked it down to...
  10. E39 (1997 - 2003)
    Hey guys - I've been back and forth through old posts trying to diagnose a camshaft CEL I'm getting. I'm always a searcher prior to posting for help, I just have not been able to find the next item to check, any help would be greatly appreciated. Picked up a 2000 540i, and pulled the following...
  11. E60 / E61 (2004 - 2010)
    And the eccentric cam sensor tabs are kaputt! After spending hours trying to remove the driver side (left side) valve cover and realizing how much space is gained by removing the vent ducts; the valve cover finally came off... along with the eccentric cam sensor tabs! It would seem to me that...
  12. E90/E91/E92/E93 (2006 - 2013)
    I initially checked the eccentric cam shaft, here is what it looks like. There is oil in it and on the plug, so that means I should replace this part with one of the guides online? To recap my last post (on another site), basically the car had been shifting kinda...
  13. E46 (1999 - 2006)
    Hi guys, looking to see if anyone knows where I would be able to (if I am able to) get CAD models for any of the E46 BMWs, I don't plan on CADing it myself so this would be a great help. Cheers
  14. 7 Series - E65 / E66 (2002 - 2008)
  15. Tools and Miscellaneous
    Up for sale is a lamp that I made out of an exhaust camshaft that was removed from an M50TU and a brake rotor that was removed from a BMW E34 525i. The cam and that brake rotor were removed from the same car. The cam is welded to the brake rotor and is very strong. The lamp looks great and...
  16. 7 Series - E38 (1995 - 2001)
    does anyone out there know anything about the cam position sensor in the 97 740 il the location and how many there are? there seams to be some confusion about this, some folks say two others say one? on my streak of lightning, there only appears to be one, which according to the code is causing...
1-16 of 16 Results