clutch

Hello, fellow BMW-enthusiasts! I recently purchased a used BMW e61 525d. When I came home I suddenly heard a strange noise when I pushed the clutch pedal in (I'll leave a video for reference). As you probably can see in the video footage when I push the pedal in it makes a strange noise and rpm...

Hey guys, I work at a Volvo dealership and was thinking (due to Covid slowing us down) there’s lots of spare time for our techs (one who is quite capable of installing an e46 clutch) to install a clutch kit on my 2006 325CI M Sport. Now at 200,000 klms, I’m starting to feel a pulsation in the...

Hey guys, I have a 2003 325xi 5-speed, 173k miles, and after pulling it into the garage for a valve cover gasket replacement and exhaust inspection, I went to pull it back out of the garage and now it won’t move in any gear. There has been no indication of clutch slippage and has been shifting...

As title states, brand new in box SPEC Stage 2 SB532-2 Clutch kit. Never been opened or looked at. Still in the box with the FCPEURO tape seal. It goes for $750 shipped from FCP. I'll let it go for $600 because I'm motivated to get money back for it. Bought for a 2008 335xi. Should fit most...

Also is there any parts I should replace since i have most my engine apart and my tranny off? It's a convertible with a brand new top for factory on it.

2 weeks ago my cars Flywheel failed and created the worst noise I've ever heard coming from a car. The RAC recovered me home and they put it down to a Flywheel issue, I put it on axle stands, ordered a new Clutch and DMF Kit and fit it over the weekend. When the cars Flywheel originally failed...

Been having a few issues. Drive train malfunction. DSC malfunction. the RPM's go from normal to 0 to max to 0. Says to let clutch cool off the moment I put it into gear. some of these seem quite odd to me and have not found any info on the rpms and clutch issues. Thanks in advance to...

Hi guys, does the clutch delay valve still do it's thing with a single mass flywheel and non-self-adjusting clutch? Or does it work exclusively with the dual mass flywheel/self adjusting clutch setup? Sorry if this is in some commonly known thread already. I've been searching a lot and have...

So it's finally time to replace my clutch on my 2003 525i at 160,000 miles I might add! I got one estimate and it includes the flywheel. It shows: Clutch kit - $379 Flywheel - $1132 Crankshaft Seal kit - $142 And labor - $950 Other sundry parts and fees with a total cost of $2972. For today's...

started driving, car working normally got on highway and drove about 35 miles at highway speed (65-85mph) when I exited the highway and went to put the car in neutral the clutch suddenly only had about an inch of throw and it stayed really low to the floor the whole time it still worked, but...

Here's a rather strange behavior from this car - I've never seen this before. The other night I parked my 335xi in a parking lot for about 5-6 hours. The car has 173k miles on it and is in good condition- well maintained. It has the manual 6-speed transmission. When I returned to the car...

I have 2011 Manual E91 330d LCi (245hp stock), car has been remapped around 300hp and 500 lbs torque I believe my clutch is slipping slightly in 3/4th gear when given a hard acceleration I have tried to find out out what is the best clutch/fw upgrade to no avail - any help on where to buy and...

So picked up a Stage 2 FX clutch from Gripforce with LTW flywheel. Dont care for opinions on it. Im posting this to clear it up so nobody has to deal with this nightmare in the future. I have ONE VERY SIMPLE QUESTION. THERE IS ONE SIMPLE ANSWER. Which way does the clutch disk go in the setup...

Hi, Im Brad, I am new here and wondered if I could use your expert knowledge if possible I have a 2013 530d manual 258bhp and need a replacement flywheel however am ultra Confused at which part number I need I was told by one BMW dealer the m57 engine flywheels fit the n57 however another one...

I can't seem to find the line that fits my clutch master cylinder anywhere. (this is my exact master cylinder) https://www.ecstuning.com/b-febi-parts/clutch-master-cylinder/21521162303~feb/ Does anyone know a place I can get the line from the master to slave hose. I checked online and at...

Has anyone on here used or is currently using a 'Clutch Stop'? Is it worth it? Is there a difference with the shifting? Does it negatively affect the clutch? Thanks in advance. https://www.ecstuning.com/b-uuc-parts/v30-big-boy-clutch-stop/cs/

I own a manual 2002 330xi with 106k miles. so as I was driving and everything was great, nothing out of the ordinary and I stopped uphill, parked and got out of the car, I left it running for just a few minutes. when I got back inside the clutch pedal fell weird but I thought It was just me. I...

DKM specializes in manufacturing performance orientated clutch kits and flywheels for European vehicle applications. Our product offering consists of street performance clutch kits to complete racing applications. Through our continued product development, testing and manufacturing processes we...

Its a 2000 E39 M5, all stock except a Turner Motorsport tune. I'm getting some pretty strange and random clutch feedback on my '00 M5. So on a normal day, the clutch grabs fine cold and hot with maybe some slight drag when shifting fast at WOT. Recently, it's been doing some weird stuff. One...

Hi ladies and Gents, I recently brought a bmw e90 2006 model from a private seller, now bearing in mind the clutch and flywheel need replacing. After driving the car for about 4 weeks, suddenly one day my car would not start, I managed to get it to start after a few attempts by absolutely...