Bimmerfest BMW banner

coding

  1. connect usb device with correct activation code to start navigation

    3 Series & 4 Series
    Hi guys, I have an issue :( after coding my F30 2016 with bimmercode I got this message: “connect usb device with correct activation code to start navigation” Any idea how to solve? Or with whom can I buy the activation code? Regards Rodolfo
  2. Unable to Code HU_Entry

    General BMW Questions
    Hi all I've run into an issue trying to code my BMW F21 for bluetooth audio. Long story short, I followed the instructions on the thread within bimmerfest to activate the bluetooth audio and reached the part where I've Coded my HU_Entry. After checking my car, the bluetooth option is still...
  3. Coding an EKPS (Fuel Pump Control Unit) for an X3

    BMW Coding and Programming
    I have E-Sys 3.27.1 installed and Launcher PRO 2.8.2. The software launches fine. My goal is to code a new fuel pump control unit (EKPS) for my 2011 BMW X3 (which is an F25 chassis). However, I can't get a successful connection with E-Sys despite trying several different Interface selections in...
  4. BMW CODING G30

    BMW Coding and Programming
    Hello, I've recently bought a g30 530xd 2017 and I would like to code some stuff on it, but as i began going down the road on how to code I got stuck on the e-sys launcher and how to acquire it. As far as I understand the program is provided when you email TokenMaster, but most people seem to...
  5. F30 - Daytime instrument cluster no light after coding

    F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Hi Folks, I did some coding on my F30 recently, nothing unsual, just changed the BMW startup logo. However, my instrument cluster does not have the white backlight during the day. It does have the orange light during night. I am sure I did not touch anything regarding this during coding. I...
  6. DFW coder needed, simple coding for cash!

    Southwest Regional - AZ, NM, NV, OK, TX, and UT
    Hi fellow Texans. I'm trying to sell my 2016 435i, but I did a fog light delete and I just need them coded out. Won't pass inspection (currently already out) and I dont want the buyers complaining. PM for my contact info.
  7. 2011 BMW 535i - Throttle lag, BT audio, drivetrain malfunction, Esys coding

    F10 / F11 (2011 - 2016)
    Hi Bimmer guyz, I am an owner of 2011 BMW 535i. I have observed the below issues in my car: 1. Throttle lag (i noticed when i have driven another BMW of same year and model). I am not enjoying the car then onwards :cry: 2. Getting full power not available drive moderately error(drive train...
  8. Deactivate all airbags with coding or removing fuses?

    E85 / E86 Z4 (2003-2008)
    Hi, I want to deactivate all the airbags in my Z4 E85. Is this possible via cable or by removing fuses? Thanks.
  9. Any E89/Z4 coding experts on here? Need adaptive headlight error delete.

    E89 Z4 (2009 - current)
    Hi all! I'm new to the E89 but heard it's a great community. I've already tried following the steps in the two most popular youtube videos. Verify connection in INPA, code in NCS Expert and coding tool, etc... It seemed to take longer to reappear but it is back. Would love some help...
  10. Getting Started w/ Diagnostics

    E60 / E61 (2004 - 2010)
    Hey folks, a new owner of a 2005 BMW 545i. So I've been doing countless hours of research to find heaps of information on diagnostics through the OBD port through programs like INPA and such. Unfortunately, I have not found an up-to-date guide on where/how to install INPA or anything. I don't...
  11. E-Series can't find INPA solution

    BMW Coding and Programming
    I've searching all over and can't find the solution for this. I downloaded Standard tools and I have connection with the K+Dcan cable no problem (I can even code with NCS expert). But, when I open INPA and under info I get "??????" for the INI, ECU and interface path. What am I doing wrong...
  12. Code out post-cat O2 sensor with NCS-Expert?

    X5 E70 (2007 - 2013)
    Hey guys, After I deleted the cats on my 08 4.8i E70, I keep getting a post-cat O2 sensor error with a check engine light.. Is there a way to code out this o2 sensors with NCS Expert? which value do I have to change on my TRC file? Thanks in advance!
  13. Fxx-/Ixx-/Gxx-series Ambient light coding options missing F31

    BMW Coding and Programming
    Hi all I have a 2013 BMW F31 with S563 light pack and ambient light. It is the small pack only with orange color in doors and nothing with radio. I have the new lists with 2 colors both for doors and radio and want to have them added. My issue is that the change color is not available in the...
  14. F001 / F006 / F010 Help coding the TRSVC on F07

    BMW Coding and Programming
    Hi all, Could you guys please help me code the trsvc on my f07 using e-sys? I use the following ecu. 66539302258 Here’s what i did so far: 1. I added 3AG AND 5DL to the FA and coded HU, ICM, TRSVC. Ista D shows errors in trsvc sying that the LIN CAMERAS ARE NOT RESPONDING. As far as i...
  15. Fxx-/Ixx-/Gxx-series F80 M3 ACSM Error

    BMW Coding and Programming
    Hey Everyone, Not sure if anyone is able to shed some light but I recently performed an EDC delete for a friend as he upgraded to Coilovers and after completing the VO coding of the various modules I was then presented with a driver restraint error and have been unable to clear it using Esys...
  16. Fxx-/Ixx-/Gxx-series Retrofit of automatic transmission, coding problem HELP

    BMW Coding and Programming
    Hello guys, Recently done auto transmission retrofit on manual F20 pre-lci. All hardware and wiring are present and done correctly - 100% sure. EGS ISN is cleared prior to any coding and connection to the car. Prior to this retrofit checked also compatibility of DDE and FEM with auto...
  17. Fxx-/Ixx-/Gxx-series F87 Adaptive LED - Used module - E-Sys issues

    BMW Coding and Programming
    Hi there, I'm absolutely new to this forum and also to coding/flashing via E-Sys in general. Just as a short introduction: I bought a damaged F87 (03/2018) and did rebuild it. Only thing missing for the moment is a working headlight. So the headlight was damaged and I sourced a used headlight...
  18. F020 (F02x, F03x, F08x) Entrynav2 8.8" no signal

    BMW Coding and Programming
    Hi, So I've managed to encounter something quite strange today, whilst trying to a FDL code in a new 8.8" iDrive Screen NBT_EVO Part No. - (65506822626) I receive "NO SIGNAL" displayed on the screen... Following options were coded under HU_ENTRNAV2 DISPLAY_SIZE_RESOLUTiON -> 8.8_ 1280x480...
  19. F020 (F02x, F03x, F08x) ACSM Airbag Error

    BMW Coding and Programming
    Hi Everyone, Wondering if everyone can share their experience with crash repair vehicles? I've recently been asked to re-code the ACSM and lock it, the car didn't need any new CAFD files injecting as they were still intact but I'm unsure of the following - Does the SRS module need replacing or...
  20. All BMWs Coding newbie

    BMW Coding and Programming
    Hi, I have taken the plunge to join after looming for a while! I'm in need of some assistance on some coding... I have purchased this equipment...
Top