Bimmerfest BMW banner


  1. RDC retrofit.

    F10 / F11 (2011 - 2016)
    Dear Friend, Recently I have retrofit the pressure control to MY2014 520d. It works only when I unplug and plug in the controller once. The system will reset itself and work normally. But it said RDC system malfunction once I restart the engine. It seems that there is no hardware problem...
  2. G-Series [GUIDE] How to upgrade your ECO PRO screen

    BMW Coding and Programming
    Hi all, This is my first coding guide ever, I recently had a 2019 520i (G30) which had the new ECO PRO screen. I did some research and digging/ comparing the two CAFDs and I found out the coding changes in the DKOMBI2 ECU. Old style New Style using coding below in DKOMBI2...
  3. G-Series Automatic activation of seat/ steering wheel heating

    BMW Coding and Programming
    Hi all, Long time lurker, first time poster. I am trying to add automatic activation of seat heating/ cooling to a G series car. The car is running the latest software _S and the entire care was just updated by the dealership. I have made the following adjustments to HU_NBT_EVO...
  4. E-Series How to code BMW E60 LCI tail light mods/effects?

    BMW Coding and Programming
    Hi people, I have retrofitted LCI tail lights and LM2 on a E60 from 2005. I have FA_write the LMA moodule and then default coded the LMA module by NCS and write in the VIN. Then have I coded all about "kalt" and "warm" and then added welcome lights and so on. I have also coded so the cars...
  5. E06x E60 LCI 523iA Dynamic Cruise Control retrofit S544A

    BMW Coding and Programming
    Hello Bimmers, Moved from original post: I am about to try Dynamic Cruise control retrofit (SA544) on a E60 523iA LCI from May 2007. To the world's surprise, this car - even being a 5 series - came without cruise control...
  6. E60 LCI 523iA Dynamic Cruise Control retrofit S544A

    E60 / E61 (2004 - 2010)
    Hello Bimmers, I am about to try Dynamic Cruise control retrofit (SA544) on a E60 523iA LCI from May 2007. To the world's surprise, this car - even being a 5 series - came without cruise control. I already did some coding and programming on my E46 but that ain't like the E60 here :) I...
  7. Coding an E38 in 2019

    7 Series - E38 (1995 - 2001)
    I'm going to help out a friend who needs his steering angle sensor calibrated. I figure I can do that with INPA (if not, I'll fire up the DIS) and my cable (an OBD/ADS interface connected through a real RS232 port). He'd like to seize the opportunity and do a bit of coding. Last time I did...
  8. Dead battery now less power and black smoking

    E46 (1999 - 2006)
    Hi, Alarm went off when I went off on holiday. Deaded the battery completely. No glimmer of lights on dash for a day or so. Managed to jump start it. Now it smokes on acceleration. Have i upset the coding or damaged a module? It tick over and starts well and is a very well maintained engine...
  9. E-Series Help Coding E83 Angel Eyes as Daytime Running Lights

    BMW Coding and Programming
    Hi everyone, I recently bought a 2008 X3 E83 3.0si M Sport. I also just learned how to code, thanks to this forum. I coded everything I wanted. However, I could not get two things to work. Angel eyes as DRL, and true speed reading on analog speedometer (coded BC_V_KORREKTUR to nich_aktiv and...
  10. Fxx-/Ixx-/Gxx-series New CIC Head unit programming F30

    BMW Coding and Programming
    Hi, I have just installed a new CIC head unit into a BMW F30 2012 series. Previously it only had the business unit with the small display. The installation process went OK and the unit works OK. Now i need to programm the new unit with my car. I have some basic knowlage with coding, i did...
  11. Coders needed in Phoenix, Az

    BMW Coding and Programming
    Hey, Any coders available in the Phoenix , AZ area???
  12. iDrive Problems - 2010 525d F10

    F10 / F11 (2011 - 2016)
    Looking for advice in relation to my iDrive. The iDrive stopped working some months ago following intermittent issues - BMW logo shows on starting but then the screen goes blank. Radio and parking sensors still work but no display. I removed the CIC head unit (Alpine) and send off for repair but...
  13. E-Series Cheat Sheet for 2006 BMW Z4 3.0i (E85)

    BMW Coding and Programming
    Just bought a 2006 BMW z4 3.0i (E85 chassis) and I am thinking of doing some coding with NCS Expert. Does anyone know where there is a good cheat sheet showing all the modules, coding options, etc... Thanks.
  14. F020 (F02x, F03x, F08x) coding the timer of heated seats

    BMW Coding and Programming
    hi, does anyone can help with coding the timer of heated seats with memory? the factory heat switch off settings is 15min after closing the car, after 16min need to push the button of heated seats again. the coding rules for seats without memory does not work on seats with memory(...
  15. F001 / F006 / F010 Sport Mode configurable in iDrive

    BMW Coding and Programming
    Hello, I coded my F11 to the sports gear, I switched the 205 to the 2TB. After the change I coded the EGS, ICM and KOMBI. Now I have a question, on iDrive I don't have the option to configure Sport+, just like this: My system is CHAMP2 (CIC Business), can not I have this configuration menu...
  16. Bluetooth is Gone after trying to code Enhanced Bluetooth

    F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Hello all, I'm new here, and in trouble. I tried to code Enhanced Bluetooth using this guide: Things went perfectly fine and the head unit restarted, things look very promising until the end, I get an error regarding cafd_000000f9-007_009_009...
  17. latest PSdZData Lite

    The MINI Board
    Hello Team, please remove this thread. Thanks, Tomo.
  18. Cruise Control Coding

    F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Is it possible to change the cruise control increments? The default is set to change in increments of 10 km/h (when you fully click the left knob on the wheel). Personally, I think that is too high and would much prefer to change it to 5 km/h
  19. All BMWs E70 Stereo to Top-Hifi retrofit CODING problems

    BMW Coding and Programming
    Hello, just did a stereo to top-hifi retrofit, and ran into some problems. First of all I have replaced complete harness from trunk to front, changed speakers, added DVD Changer and amplifier. Then supplied both dvd and amplifier with power supply (those was missing, becouse the wiring harness...
  20. F015 / F016 / F085 / F086 Coding In North NJ

    BMW Coding and Programming
    Hi Guys, Just took delivery of a 2018 F15 X5 50i. I need to get it coded. My previus cars were lal coded by octopump but he seems to have gone. Is there anyone who does coding in NJ? Thank you.