BimmerFest BMW Forum banner
cylinder
1-17 of 41 Results
  1. Suspension and Braking
    Hi There, Looking to replace your E46 M3 master cylinder and DSC sensors? My loss is your gain. A brand new BMW Master Cylinder and 2 DSC Sensors from Germany for an E46 M3. Never been opened. Master Cylinder $400 + (2) DSC Sensors $150 each: $700 for everything. part Numbers: 34521164458 DSC...
  2. E39 (1997 - 2003)
    Background: My 528i (m52tu) has low compression in cylinder 3, and I'm in the process of removing/replacing the cylinder head. The car was overheated years ago, still ran ok but was never quite the same, had cylinder 3 misfire codes, spent some time in storage and now I'm tearing into it. My...
  3. E46 (1999 - 2006)
    Everyone - just posted this, but do not see it on the thread. Apologies if this appears twice. About a month ago, the SEL on my 2004 325 popped on. Had the code read and seemed like it was time to change out the spark plugs. The car has 91K miles on it. I replaced all plugs w/ NGK plugs and...
  4. E70 X5 M and E71 X6 M (2010 - 2015)
    X5 with 83,000 miles, engine light was on and took to dealer. Intake pipe absolute pressure too high. Recommended repair: Cylinder Head Replace OR Exchange Engine!!! OMG! Dealer won't know for sure until they take the car apart and then I'm stuck with whatever they find out. Anyone else...
  5. 7 Series - E65 / E66 (2002 - 2008)
    Good evening, I just recently replaced the valve stem seals on a 2007 BMW 750i with a 4.8L N62B48B engine. I went to start it up and the engine runs rough then stalls. This problem never existed prior to the job. I did disconnect the and remove the intake manifold during the process, upon...
  6. E36/7 Z3 (1996-2002)
    Hey Everyone, I am replacing the head gasket on my 1996 BMW Z3 1.9l after blowing it earlier this summer. I sent the head off to be shaved and have a valve job. I recently received the head back and am currently installing it. Here is my question... I am using the Chilton Guide #18400, and on...
  7. E39 (1997 - 2003)
    Hi all, Did a bunch of searching and came across a few leads but nothing really solid. Here's the scoop: I have an 03 530i I swapped out an old door that had some rust for a cleaner door off another vehicle (02 525i). Initially, everything worked great. There was power to the door, I could...
  8. E63 / E64 6 Series (2004 - 2010)
    I am trying to be able to deactivate one cylinder bank in my V8 and alternate between banks, either manually or automatically (by time, or mileage). I read some threads on this, but no one talked about how to actually achieve this. Does anyone have any ideas? Turning off fuel injectors...
  9. 7 Series - E65 / E66 (2002 - 2008)
    //////Solved!////// Read post #15 2007 750i 84k ***I posted this in bimmer forums, but I can never get a response. I believe you guys can help me out.****** I've search hundreds of threads and can't seem to find a clear answer. Car just randomly started to idle rough as I pulled into my...
  10. E90/E91/E92/E93 (2006 - 2013)
    Hey all. New here and am new to BMWs so I'm not very knowledgeable. I've been having an issue with my '08 335xi. 54k miles. The issue is only prevalent when the car is cold so I deal with it every morning. With the clutch pedal fully depressed, the car still creeps forward ever so slowly. Like...
  11. X5 E70 (2007 - 2013)
    The vehicle has been diagnosed with a seized engine from dealer and wants 17k for engine Bmw corporate does not want to provide any assistance stating out of warranty by 20,000 miles nothing we can do currently 70,000 What have other people done in the past get a new engine or just sell as is
  12. E46 (1999 - 2006)
    My top will open but needs a small push in the front when it starts to fold it into the storage bin and then it will complete the opening sequence. On Closing the reverse its true. Once the cover opens and it starts to lift the top from the bin it needs a little pull on the front end and then it...
  13. 7 Series - E38 (1995 - 2001)
    Hello... I have a problem :cry: with E38 4.0 95r. The engine is only 4 cylinders (right - passenger) - it is not. After diagnosing the engine is working as a watch (all cylinders), but the next not start again. I will give an extract from the diagnosis. (Unfortunately, I have only Carsoft) Why...
  14. E39 (1997 - 2003)
    So.....I have a 2000 528i, E39, 180K miles, and My mechanic said yesterday I have a leaking fuel injector on cylinder 6. He Wasn't specific about the leak, not sure if its O-ring, the body of the injector or the top or bottom of it is leaking. (YES, I should have asked, but pretty upset with the...
  15. E34 (1989 - 1995)
    I have a broken ignition shaft... I have already removed the ignition lock cylinder (it's shot too) and the ignition solenoid (solenoid is good). I was able to get the broken piece of the shaft out (on the lock cylinder side). Is there a way to get the rest of the shaft out??? 1995 525i...
  16. E60 / E61 (2004 - 2010)
    Hello, I have a 2008 535xi that i recently installed a JB4 on. For the first couple of days i was extremely happy with it, and after about a week or so i decided to try E85 on map 5, so i filled up with 5 gallons of E85 and the rest 93 octane gas. After a few runs the car was running amazing...
  17. E46 (1999 - 2006)
    Hello all, I am happy to be posting this time as a true owner of a BMW. I managed to acquire a 2003 325xi at a very good price. The car is not perfect but runs and drives. I am looking forward to good sources of information here as I have observed for quite some time but at this time here is...
1-17 of 41 Results
Top