BimmerFest BMW Forum banner
damper
1-7 of 7 Results
  1. F06 Gran Coupe (2013 - 2018)
    Hi Guys, I am receiving the following issue with my 2013 BMW 640D Grancoupe M Sport. Whilst driving, I start the engine and immediately feel that there is reduced power. The engine sounds noisy however no error codes are displayed on the cars dash. If I pull over, turn the car off and on then...
  2. E60 / E61 (2004 - 2010)
    It looks like it’s time for new dampers on my 550i (E61). I can save a bit of money by buying Bilstein (“OEM”) dampers for the front, though the “OEM” dampers my local specialist found for the rear are a brand I don’t know (and don’t remember, though it starts with a C or K … ). I’ve had good...
  3. X3 F25 (2011 - 2017)
    Hi, My first post! Currently considering buying a 2nd hand X3 SE. Where I am from, roads are pretty bad, so I was thinking that variable damper control would be a good option to have, if I can find it. Can anyone tell me how to detect whether a car has VDC from the buttons/controls on the...
  4. F07 Gran Turismo (2010 - 2017)
    Hi there guys, I am new to these forums and a new BMW owner in general. I have driven a number of BMWs but never owned one before. so recently I have got myself a 2nd hand BMW 535i GT (F07) 2011 and I like it! Now, The thing is that this car doesn't have navigation, but the previous owner, it...
  5. X3 E83 (2004 - 2010)
    Hey guys, Need some advice. My X3 puked its oil out of the LF dampener and needs replacement. What would you do? 1. OEM or aftermarket? 2. Is a service manual available for a 2006 X3? If so where can I buy one? 3. Any additional parts that should be ordered while changing both the left and...
  6. E39 (1997 - 2003)
    Hi, folks. This is my first post so forgive me if I get some of this wrong. Here's my problem. I have a 2000 E39, 5-speed, approx 123,000 miles. I had the clutch replaced about 2 years ago. Recently, I've had some annoying vibrations when getting off the line in 1st gear, followed by more...
  7. E30 (1982 - 1993)
    Hi, I have a '86 325es. I think I blew a head gasket and I decided to fix it myself. Everything has been going smoothly but I'm a little unsure on how to get the crankshaft damper off. I already took the pulley off no problem. But, I'm unsure on how to get the damper off. Do I need to remove...
1-7 of 7 Results
Top