Search Results for ‘e70’

Hi guys, got a problem with the parking brake, like may others! I've got a 2007 BMW e70 X5 Had the parking brake malfunction vehicleay roll warning and yellow warning on the dash First thing I did was YouTube etc and changed fuses, the motor and relay, no joy! So bought an eBay one and put...

I had a spun bearing on my n55 x5 2012 at 136k after an oil change (20miles after) the crankshaft was damaged i ordered a new engine and it arrived last week getting ready to put it back together but having a hard time finding the torque specs for valve turbo intake oil pan etc etc the block...

I have an n63 with 130k on it @540hp (allegedly.. 650 for sure with the JB4 sticker on the window..) the turbos drink oil, sure.. the coolant lines, connectors and clamps needed replaced behind the alternator and in the valley. Door lock actuators needed replaced up front, needed coils and plugs...

EDIT: figured it out, I found an option ($655) that was different than what the VIN decoders said($693). I changed that in the VO, then FA_Write to CAS, then SG_codieren to CIC. Hello, I just recently swapped my old CIC in my 2012 X5D with used one from a 2011 because it started rebooting...

I replaced my belt tensioner about 5K ago and didn't notice anything wrong. Now the engine seems to vibrate a bit and the tensioner does move a little bit. How much should the tensioner move on idle ?

Recently had to change bad fuel injector E70 with N55 engine. Ours is a 2011 model year. It seems there were some changes in the model of the N55 engine that year. From my research it seems models built before Sep 2010 had one version of N55 and after Sep 2010 had another version. How does...

Hi My car is 2009 BMW X5 e70, gasoline Firstly the engine light was on, used scanner code P0012. Driving ok this time, changed oil filter, engine oil. Secondly battery light on after - changed to new battery Thirdly, After all this happened, no start and no crank. All of sudden OMG.. even...

I’ve done so much research and it can really be anything according to my knowledge but if anyone with anymore knowledge has mange any experience with these issues please let me know i bought the car close to a month ago 2007 BMW X5 3.0si 2 days into owning it It stalls and I get the following...

The almighty BMW gods have recently blessed me with a rather bizarre powertrain symptom on my 2013 E70 X5 35i Premium...I could use some guidance if anyone else has also experienced the same. Here's my story: I had just finished placing my groceries into the trunk of my X5 after my weekly...

I have an 09 x5 e70 with an n52. I noticed the car running rough at idle. So I shut it off, put a code reader on it, and the code that popped up was a pcm/ecm wiring harness code which seemed weird. I also noticed that the air boot right after the air flow sensor and filter was off so that would...

I've been running 10w40 in my n62 for some months now and I want to know if it is safe to do so or if it is too thick for engine.

I've read through all the misfire threads on here and anywhere else I could find over the past couple of weeks, but haven't found a solution to a misfire that has started occurring randomly. This may end up a little long, but I'll start from the beginning... Three weeks ago I was taking a road...

X5 E70 4.8i Dual Side Exhaust setup, figured I would share. 1st and most importantly I insulated the gas tank. I reused the heat shroud that was in the back under area. I also wrapped the exhaust pipe under the gas tank area with lava wrap "the stuff used on motorcycles". Flow Master Hushpower...

Hello, I tried to code the lights using BimmerCode, but received error: "Footwell module (FRM3_E7X) Error memory contains critical errors" So there are not settings available. I made full scan of the car with Bimmerlink, but it doesn't detect any errors. Everything is clear. The car works...

Hey everyone. I have a 2012 e70 diesel that started making an odd sound yesterday while I was driving(beyond the normal diesel sound). The best way I can describe it is like a flapping or fluttering sound as I accelerate, almost sounding like bad exhaust. It seems to happen when accelerating...

Hi Guys, So after weeks I have changed all glow plugs, replaced fuel rail pressure sensor (genuine Bosch) and Pressure regulator (Genuine) All the codes have cleared up. except an error with says "4X4 and DSC failed" and the following codes appeared: 6EC4 which says DSC: steering-angel sensor...

I got a 2011 E70 in 2013, and started browsing BimmerFest soon after... should have started before and I may have stayed away from the N63. Now that I am staring the DIY valve stem seal replacement, I decided to join. I have the parts ordered, and cameras set up, so wish me luck!

Hello X5 owners, New to this forum. Can someone recommend me a good independent (not dealership) mechanic who can work on X5 (E70 3.5i) to replace valve cover gasket? What would be the cost of labor? Thank you RV

My 2012 X5 35i xDrive is giving me several errors and I'm not sure why. It's in the BMW garage now and they have it connected to their diagnostic system and cannot figure out what's wrong. I'm getting the following errors: Braking/chassis stabilization malfunction ABS 4x4 Parking brake...

Hi Guys, i need help with my Bimmer. i have a BMW X5 E70 3.0d 2008. Which wont start. It was working fine then just recently wont start. I drove to supermarket, came home, then went to start and it wouldnt. It is turning over but wont fire. A friend came to have a look and the OBD II scanner...