BimmerFest BMW Forum banner

egs

  1. 7 Series - F01 / F02 / F03 / F04 (2008 - 2015)
    F01 Background: Experienced low voltage error and trans code 400626 turbine sensor. Shop said possible bad battery due to no registration and would require a new battery. Once installed and registered the codes go away for 2 weeks. Code 400626 comes back along with 1D3901 Electronic...
  2. 7 Series - G11 / G12 (2016 - current)
    F01 Background: Experienced low voltage error and trans code 400626 turbine sensor. Shop said possible bad battery due to no registration and would require a new battery. Once installed code goes away for 2 weeks. Code 400626 comes back along with 1D3901 Electronic transmission control egs...
  3. E82 / E87 / E88 / F20 1 Series (2008 - 2014)
    Hi, guys! Could someone help me with this, please. i owned a bmw 120d(n47) 2008, and i want to upgrade firmware in EGS module to Alpina D3 firmware. I used WinKFP, in GKE215 i take 7603531 firmware. Process was ok, everything completed well. After this update, i coding EGS, than delete all...
  4. BMW Coding and Programming
    Hi. I'm intented to flash my EGS in my F48 . Could I execute the flash procedure (using ESYS) if I don't have an external power supply , assuming that the whole process doesn't need so much time ? If not , then could I use another running car with his battery connected to mine's ? Thanks in...
  5. X6 E71 / E72 (2008 - 2014)
    Hello; I have tried to update EGS software with winkfp, my old assembly number was 7624480, I tried to update to 7644113 I started update procedure with no error when it complete update process 100% it gave following error [21:29:37.157] [2017-08-30] [WinKFP Tool] 2089 PABD/CABD...
  6. E60 / E61 (2004 - 2010)
    Hey folks, Posting because I'm really stumped over an electrical issue I cannot resolve. The car, a 2006 550i V8, will not start or click when the start button is pressed. Please bear with me as my illness prevents me from being efficient performing tasks quickly! But I can say I've ran tests...
  7. E39 (1997 - 2003)
    Hey all, My transmission recently failed on me so I purchased another one and had it fitted. Does anyone know whether the EGS (Transmission Ecu) should also be replaced if the transmission was from another year? Mine is a 97 and the transmission I purchased is from a 2000 model, the seller...
  8. BMW Coding and Programming
    Hi guys, I am new to this forum but have been getting a lot of info from it. So I updated my EGS module to get rid of the 2-1 hard down shift with the DIY on this forum which can be found here: https://www.bimmerfest.com/forums/sh...d.php?t=621988 I believe I did everything correctly with...
  9. E60 / E61 (2004 - 2010)
    Hi guys, I am new to this forum but have been getting a lot of info from it. So I updated my EGS module to get rid of the 2-1 hard down shift with the DIY on this forum which can be found here: https://www.bimmerfest.com/forums/showthread.php?t=621988 I believe I did everything correctly with...
  10. E60 / E61 (2004 - 2010)
    Hi Guys, will try to be as brief as I can. Bought an 04 530i with 177K Miles over the internet sight unseen. When the car arrived, Trans Fault was on the display. Mechanic saw the Trans Pan was cracked at the rear and almost all the fluid was gone. Replaced the Trans Pan along with the sleeve...
  11. 7 Series - F01 / F02 / F03 / F04 (2008 - 2015)
    Hello All! Does anyone know where the EGS is located on the F02? I havent even been able to find a picture of it or get pricing but I have found references of it in a few workbooks. :dunno: I read on a 5-series forum that it is located under the hood by the ECU but I still haven't had any luck...
  12. E63 / E64 6 Series (2004 - 2010)
    Hello all I am new to this forum and need some serious help!! I have a 645ci and it was having the dreaded slipping when you get on the gas. I replaced the square sealing ring under the mechatronics. the old one looked good but replaced it anyways. I also replaced the sleeve where the...
  13. E39 (1997 - 2003)
    Hello everyone - I am a newbie and this is my first message. I am reliably informed that I need a replacement EGS for my 1999 E39 535i auto as I am getting 'trans failsafe' on the readout. Also, I get warning lights for brake, ABS, check rear lights. My car has done 160,000 trouble free mileage...
  14. X5 E53 (1999 - 2006)
    I have an 01 x5 4.4i 107,000 miles and just recently the transmission fail safe light came on. When this happens the transmission is usually warm and the car stops shifting remaining in 4th gear. The speedo stops working as well. I took it to a bmw shop and 3 they said the EGS control module...
  15. X5 E53 (1999 - 2006)
    X5 Transmission failsafe program EGS Module problems I have an 01 x5 4.4i and just recently the transmission fail safe light came on. When this happens the transmission is usually warm. If I move it into triptronic nothing happens and it feels like it is 4th gear. The speedo stops working as...
Top