I purchased the connected drive package yesterday and was trying to do a USB map update.
As you may expect I also encountered the notorious BMW Download Manager issue - it won't unzip the file to my USB drives as BMWDM refuse to recognize them as a USB drive. (Sandisk used to have a...
Is anyone having trouble login into the new myBMW app? I've been having login issues for weeks now and cannot figure out what the issue is. I've tried changing the password and I'm still having the same issue. I'm getting the error pictured below.
car: 2009 128i convertible
History: involved in a crash, not sure how bad, DRIVER SIDE knee airbag was deployed
iDrive errors: passenger restraint system
Car drives fine and doesnt seem to have any issue other than the indicator light for which gear i am in on the shifter does not light up...
Can someone please help me with these code errors
I cleared all of my codes as I had a few and run my car to see which ones are persistent
I found the above two and not sure what's the cause
Here's the output from my odb2 ran on my BMW E90 lci 2011 saloon efficient dynamics
Car Scanner ELM...
I have big problem with coding.
I have car two weeks - E60 525i 09/2004
INPA, ISTA, Tool32, WinKFP all working (read clear fault memory, update module or reset LM work)
First problem - someone probably delete all FA from car. In NCS Expert (F1, F3, E60, CAS) NCS read VIN from car...
I bought this 2005 525i (M54 engine) which has the sport package a couple of years ago with this strange behaviour where the active steering malfunctions after about 15 minutes of starting the car. Doesn't matter what distance I've traveled, whether the car is moving or stopped, going over bumpy...
I am trying to program my F25 with the latest I-Step F025-20-07-520. I have successfully programmed all modules except HU_ENTRYNAV. When I try to program the HU I get the error:
ECUId:HU_ENTRYNAV_0x63 not accessible cause could not be switched to parallel programming mode [WARN]...
Not sure if anyone is able to shed some light but I recently performed an EDC delete for a friend as he upgraded to Coilovers and after completing the VO coding of the various modules I was then presented with a driver restraint error and have been unable to clear it using Esys...
I am receiving the following issue with my 2013 BMW 640D Grancoupe M Sport. Whilst driving, I start the engine and immediately feel that there is reduced power. The engine sounds noisy however no error codes are displayed on the cars dash.
If I pull over, turn the car off and on then...
Hello, Lurker but a First time poster here.
I am having an issue with my 2012 BMW 328i. I've had the car for 2 years now and about 3 months after buying the car I started getting a Drive Train Malfunction Error (loss of power) on the idrive display. When I turn the car off the drive train error...
The Flat Tyre Monitor (RPA) failure just appeared on my iDrive screen this morning when I started the car. :cry:
I read the code with ISTA+ / Rheingold and read the code "48070C" with a description of "Tyre failure indicator: Data implausible."
I have read posts about changing the ABS...
I updaten my DATEN files to version 60.
Then I was updating other modules and they worked fine. When I tried to update DME/DDE module it gave me an error "cabd (00EK9287) file not found"
What I did:
Put ZUSB number
Put VIN number
and after hitting done error came out
I have been playing with the Carly application and I have had an error 00A6FC which is described as a data CRC error.
I could find nothing about it in the internet but eventually I have found on one forum that the problem comes from iDrive-coding via the Carly app.
Even when I cleaned the error...
Hello guys, I need your help. When cold or when the car wasn't driven for a day or so, I try to start it(e46 facelift 330d), it starts and then dies right away. After a couple of tries(when the problem started) it srarts and its fine for the rest of the day. Now I need about 8-10 attempts to...
Hello, be sure the engine is running and battery voltage is not low.
Follow the procedure below exactly and report back on how it worked.
Read through all steps first and give it a few tries.
Following replacement of a power window motor or a door module and following...
Hey everyone, I went to AutoZone to check what the engine light was on for. Turns out the code is P12B8, which is the ambient pressure sensor overrun pressure too low. Does anyone know where this sensor is at? Im trying to see if I need to replace it or if its just a minor fix.
Hey ya'll, I just want to get an opinion.
I have had my 2003 525i for about 4 years now, and it is awesome, but now it is running really rough and idling VERY poorly. Came to a point where I actually stalled in the road at a light (its also an automatic). I got the error codes and one that...
Been getting intermittent messages "abs error, drive moderately", "brake & control failure, dive moderately" and "abs failure, drive moderately". Just had codes read, and got following:
4a1f - Glow control unit (have a few glow related codes, lumpy start when cold, nothing new...
Hey everyone, got an unusual one for you. Before we begin, this is my first post so please correct me if I do anything wrong. And yes, I know what I did was not a smart move. Moving past that I hope someone can help me out with this.
Car: 2008 BMW 550i (e60)
A while back I dropped my key fob...