BimmerFest BMW Forum banner
fitting
1-7 of 10 Results
  1. E36 (1991 - 1999)
    Going to be installing a catch can as soon as it arrives in the mail but am still trying to figure out how to hook up the hose to the valve cover. I have a M50 with the aluminum valve cover so was thinking about tapping the hole to fit a 10an or whatever size it is to a barb fitting. Rally Road...
  2. E30 (1982 - 1993)
    Car: 1985 BMW 325e Problem: Blower Motor Hello, I bought my e30 back in January and the owner gave me an uninstalled blower motor. I installed it and it worked fine except that anytime I put the speed above 1 or 2 the spinning fans scrape against something. I'm not sure if I'm not placing it...
  3. X5 E53 (1999 - 2006)
    2005 X5 4.4i - N62 I replaced the upper radiator hose Saturday because the nipple to the expansion tank crumbled. One of the smaller branches on this combined hose reaches a fitting on the lower opposite side of the radiator. When I removed the wire retaining clip for the old hose I must...
  4. E34 (1989 - 1995)
    Hi all, Car: BMW 520i SE 1990 Sedan Hopefully the above is enough to apprise you of my car (I'll get some pics soon). If anyone can help with a practical issue, I would be grateful. At the bottom of the doors is a weather strip. The one on the drivers side has rusted to bits and practically...
  5. General BMW Questions
    TL;DR: I don't like my new car and want to trade it in for another with December incentives coming up. Am I being irrational? Hi all, I'm fairly new to the community and did a lot of lurking as I researched my new '14 428xi (purchased, not leased). I can't find anything similar to my situation...
  6. E36 (1991 - 1999)
    While replacing the PS reservoir today, I had to resort to cutting the smaller hose that runs from the cooler lines back to the reservoir. I cut it off right at the end of the reservoir nipple so I would have enough slack to reuse the hose. For whatever reason though, it is now a little short...
  7. Do-It-Yourself H.Q.
    hello all, really need help here and quite quick...I have a 1997 Z3 and the back window is a ripped so it will need a replacement... to have it replaced - £200 Buy and (struggle)DiY - £70 OR... I have been offered a 2001 replacement hood for £220 which I'd have to have fitted.. SO 2...
1-7 of 10 Results
Top