BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. BMW Coding and Programming
    Hi guys, I just wanted to ask if it's possible to let me know which is the last version of ISTA D that has a working Basic Features tab? I tried to enable it on my 4.31.4 version and it did work - it showed up. However, it only works for vehicles up until around e46 after that it tries to open...
  2. BMW Coding and Programming
    Hi everyone, just like many others I am trying to get a hold of ISTA D. However, again like many others, I am confused about which is the latest version that doesn't require paying for a license. I am going to list a few questions that I think will be useful to people who are still getting the...
  3. BMW Coding and Programming
    Hi everyone. Could someone tell me about difference between ISTA d,p and+?? And where it can be purchased without fraud? PS: the next thing I would need would be TIS Some tips? Thanks;)
  4. BMW Coding and Programming
    Hello all, I will need your help with some questions if it s possible. I ve installed ista 4.06 with all the auxiliary's programs and when i connect to the car i see the vin of the car but cannot establish the connection with the car. If anyone has any ideea it will help a lot, i am using win10...
  5. E90/E91/E92/E93 (2006 - 2013)
    I'm trying to use ista+ on my windows 10 dell laptop to run some diagnostics and do some programming on my e90 2006 330i when I click complete identification it just comes up with a blank connection manager screen I'm using a k line cable and I know my cable works because it reads the car in...
  6. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Hello! I connected the car to ista and after the initial test half of the modules were yellow and the powersteering one was red. Since there are no faults displayed on the car should I just delete those errors or should I be concerned?
  7. BMW Coding and Programming
    Hello! I've done some research and from what i understood the best choice to do all of these is ISTA. I have one thing that is not clear though and that is what kind of cable do i need to use? Do i need an Ethernet-OBD2 or an USB-OBD2 K+DCAN? The car is a 2013 f30 if that matters at all. Thanks!
  8. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    This is the information for my car: Year: 2013 Model: 316iA (F30) Connection Method: ENET Cable I am trying to change the transmission fluid. I understand that I have to use the "ABL Service function, display and reset adaptation values " service function. I am able to find the option. But...
  9. X3 E83 (2004 - 2010)
    Tried to do smog check today and I was told by technicians that my car would fail smog check because car battery died and I have not driven enough miles since then. They were not able to advise me how much more miles exactly I would need to drive, but they said around 500 or in some cases even...
  10. Do-It-Yourself H.Q.
    My 2008 X3 E83 had worn transfer case actuator gear that caused triad of lights. Fixed this by replacing the worn plastic gear, flushing the transfer case fluid and re-calibrating transfer case with ISTA/D. After 1000+ miles the triad of lights came back. However, this time I am NOT...
  11. BMW Coding and Programming
    Hi Guys! So this is a little bit tricky one for me and was hoping someone here might knew something about ISTAD. I have this BMW E39 M5 that once was a 528, and has been built up from scratch, as i bought it this way. I bought rheingold ISTAD and ISTAP a while ago, and until now i have only...
  12. E90/E91/E92/E93 (2006 - 2013)
    UPDATE: Got a new key made via BMW Multi Tool, engine turns over but no start due to Tampering Protection Fault...please skip to Page 2 (post#48) -------------------------------------------------------- I'm brand new here and just got my first BMW... It's a 335D and we purchased the car...
  13. BMW Coding and Programming
    Hi, I'm new here and already have a question about Rheingold ISTA D. Everything is installed with the SQLiteDBs files in the correct folder. It's works... but I can't do test plans? Is something missing? I also tried to "unblock" the zip files but couldn't find unblock option when I looked at...
1-13 of 13 Results
Top