BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 55 Results
  1. 5 Series
    Hello everyone! I'm looking for support to find 6 cables. 1) Unlock the doors 2) Lock the doors 3) Open the trunk lid 4) Horn 5) Hazard lights I would appreciate any kind of help. I hope that at some point all of these wires meet somewhere close to CAS module or something... Thank you in...
  2. X3 F25 (2011 - 2017)
    Hi All, i retrofitted an OEM backup cam last week on my 2016 LCI F25, and although i managed to get the camera to show up, I get a periodic warning on the dash saying "rear view camera failure". I am relatively new to coding and have both e-sys and Ista+ installed but only an e-net cable ( no...
  3. 3 Series & 4 Series
    Which software package and where to get it. I'm a competent home mechanic and need to replace a glow plug in my F31. As it's cylinder 4 I'll need, I think, to take off the inlet manifold and need a guide on how best to approach that. I need ISTA on my pc laptop to provide diagnostic support and...
  4. BMW Coding and Programming
    Anybody know why I may not be able to configure the ICOM using the connection manager? the option stays greyed out when selecting the ICOM. If I use the company leased version of ISTA, I do not have a problem configuring. Many thanks.
  5. BMW Coding and Programming
    Hello guys, i am having the above issue with my F10. ISTA+ unable to communicate with the car using ENET cable. on my laptop the network LAN adaptor is set to automatic. ISTA+ is set to use EDIABAS.ini and also tried with ENET option, both doesn't work. i have also edited the...
  6. BMW Coding and Programming
    I got ISTA+ installed on my VM a year ago and working perfectly fine with my F10 (via e-net cable) without the need of any configurations or modifications. These are the instructions I had followed when I initially installed ISTA+. I just bought an E89 and trying to figure out what I need to...
  7. BMW Coding and Programming
    Hello, I bought a G20 (from 2021) and want to know what software I require to diagnose and FDL code such new cars. Somewhere I already read that for diagnosis a very new version of ISTA-D versions is required which needs a pc specific license. And for FDL coding E-SYS 3.39.1 + a bought version...
  8. General BMW Questions
    Attention all Forum users. I'm announcing a FREE promotion. If you have the equipment to work with your car (like a kdcan, Enet, Icom, VCX) I offer free assistance in diagnosing and coding your car. Just write to me and I will try to help you by remotely connecting to your computer, make the...
  9. BMW Coding and Programming
    Hi guys, I just wanted to ask if it's possible to let me know which is the last version of ISTA D that has a working Basic Features tab? I tried to enable it on my 4.31.4 version and it did work - it showed up. However, it only works for vehicles up until around e46 after that it tries to open...
  10. BMW Coding and Programming
    I will pay someone to connect through TeamViewer and fix my ista, ediabas, inpa, or whatever I need fixed to be able to connect to my car properly. Please and thank you in advance!! I am struggling here and I have been working with this for approximately 6 months. Although, I am closer, I am...
  11. E90/E91/E92/E93 (2006 - 2013)
    Looking for a full ista download with instructions if possible. Much appreciated. Please and thank you!
  12. BMW Coding and Programming
    Hi Guys, I installed ISTA and it's not being able to read a VIN (the long one). I have installed absolutely all of the prerequisite programs such as Visual Distrubite Java, Net framework, etc. Installations steps were followed to the point. I still haven't connected it to my car with the K+DCAN...
  13. E90/E91/E92/E93 (2006 - 2013)
    Hi guys, I've seen a few posts regarding ista but nothing very recent. I've been having some issues with misfires and banks 1 and two running too rich and too lean. One possible cause of this, it turns out, was that one of the four o2 sensors in the exhaust had completely stopped working. The...
  14. BMW Coding and Programming
    I just installed a used SRS module from a car that was never in an accident and am now getting the following fault codes (via INPA): 01 mrs 9402 e0 93a9 e0 93b2 e0 9423 e0 when i plugged in the SRS module and ran ISTA + it was green on the tech tree but then became yellow with the same codes...
  15. BMW Coding and Programming
    Hello everyone, First of all, I want to apologize for my bad english! I recently did some coding with Bimmercode and e-sys with the yellow cable and installed a front and rear camera module on a 5 Series (2016) F11 with NTB 6.5' + 6WA pannel. During the installation of the cameras, I had to...
  16. BMW Coding and Programming
    Hi all, I have an issue with calibrating the dsc for codes 5dd0 & 5dd2. I'm running ista+ version 4.10, im able to connect to the car fine but once calibration begins it fails within a few minutes stating that connection was lost between tester and car. the cable works fine i was able to code a...
  17. General BMW Questions
    Dear community, ISTA displays the mileage and a field "Existent" next to every fault code read. What are these exactly? Does "Existent = yes" means that the error is still there, while "Existent = no" means that this fault occurred some time in the past, but it isn't present any more? Are...
  18. BMW Coding and Programming
    car: 2009 128i convertible History: involved in a crash, not sure how bad, DRIVER SIDE knee airbag was deployed iDrive errors: passenger restraint system Car drives fine and doesnt seem to have any issue other than the indicator light for which gear i am in on the shifter does not light up...
  19. BMW Coding and Programming
    Hi all, I am having a bunch of yellow and red boxes pop up when i run ISTA's vehicle check where it shows you the "tree" of all your modules... any one have any info on how to read this or what i need to do to make the yellow and red turn to green? I also have a cable error issue with inpa...
  20. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    My car is a BMW 320D F30 ED from 2012 with N47. I have some issues with using Bluetooth and USB. There is also impossible to set clock in iDrive even though the car instrument panel have correct time. Also I have a SOS call system failure error, which is a bit annoying. In attempt to diagnose...
1-20 of 55 Results
Top