BimmerFest BMW Forum banner
kombi
1-18 of 25 Results
  1. BMW Coding and Programming
    Hello everyone, First of all, I want to apologize for my bad english! I recently did some coding with Bimmercode and e-sys with the yellow cable and installed a front and rear camera module on a 5 Series (2016) F11 with NTB 6.5' + 6WA pannel. During the installation of the cameras, I had to...
  2. E60 / E61 (2004 - 2010)
    Got his weird thing with my e60 530d '04. For a while I'm getting the annoying message: Electronics failure followed by ABS and auto gearbox warnings. Sometimes the wipers goes on 1 time and often a few warnings lights on the dash lit up for a second. ISTA+ is saying a few errors connected to...
  3. BMW Coding and Programming
    Hi, I need to swap a basic kombi on a F1x with an used one. Let say the excesting one is somehow faulty. I maniged to locate the 160d0wq chip on it (see picture). Which I assume it store the mileage and vin. Would swap the chip from the faulty (original) to the used one do the job ? or I need...
  4. X5 E70 (2007 - 2013)
    I recently purchased my 2008 BMW X5 3.0Si an i love it. However, i purchased it with the air suspension deleted and a set of coilovers installed on all four corners. The coilovers ride nice and are adjustable but as expected the "Self leveling suspension Malfunction" code is on the dash. I was...
  5. BMW Coding and Programming
    Hello guys, I retrofitted a NBT_HU into my F20 LCI from end 2015. The original device was an entrynav that had some audio issues :/ I bought the FSC online so Navigation isn't greyed out anymore. After that I tried to FA Code the NBT i got an error message that's like: HU_NBT 63 Coding...
  6. BMW Coding and Programming
    Hi all, This is my first coding guide ever, I recently had a 2019 520i (G30) which had the new ECO PRO screen. I did some research and digging/ comparing the two CAFDs and I found out the coding changes in the DKOMBI2 ECU. Old style New Style using coding below in DKOMBI2...
  7. BMW Coding and Programming
    Hello Bimmers, Moved from original post: https://www.bimmerfest.com/forums/showthread.php?p=13139621#post13139621 I am about to try Dynamic Cruise control retrofit (SA544) on a E60 523iA LCI from May 2007. To the world's surprise, this car - even being a 5 series - came without cruise control...
  8. X6 F16 (2015 - Current)
    I have a challenge with a BMW X6 f16 that I hope someone can help me with. The problem is that the odometer or kombi mileage reading is fixed on only one mileage. It is not encasing, as it should. I have updated all ECUs exept KOMBI and HU that will not update. I have deleted all errors in the...
  9. E60 / E61 (2004 - 2010)
    Hello, On bmw e60 530i 2004 I got "Speedometer display malfunction" error showing up every time I start ignition and my digital speedometer always shows some number like 10-20km/h even car not moving. I suspect that this affect my fuel consumption numbers. What I hate tried to update DATEN...
  10. BMW Coding and Programming
    This forum has given me so much information thru all these years, felt I need to give some love back :) :angel: This research on how to setup a DHCP server on an external router for use with ICOM took me a long time. There is information all around the internet about this issue, but no how to...
  11. BMW Coding and Programming
    Hi - my 340 displays the navigation info on the HUD which is great, but I was wondering if it's possible to also display the same map on the dashboard (below the gauges)? I'm pretty sure if I turn off the HUD the map and other info displays on the dash but it would be cool if I could add the...
  12. F10 / F11 (2011 - 2016)
    I have followed a guide to adding 4U2 option and VO Coding with production date change to enable the efficient dynamics screen however after coding the kombi module I am getting camera based support system error and Lane departure failure? Any ideas why? Shawnsheriden guide said to update/vo...
  13. BMW Coding and Programming
    HI All, trying to calculate TAL prior to Kombi retrofit and I keep receiving 1 warn message. C383 WARN events: "[] Warning 1680, no application data list available for ECUId:PIA_MASTER_0x63, (Exception: error while switching to extended diagnostic session)" [C382] apparently my I-Level...
  14. BMW Coding and Programming
    On my 2012 US 328i F30, I upgraded from HU_ENTRY to HU_NBT using a unit I bought on Ebay. It came with a PNP cable. ALL seemed to work surprisingly well for several days, without any coding, except that the M splash screen appeared on startup. Today I did FA and VO coding of the car and...
  15. BMW Coding and Programming
    Hello, I lost my variant coding file for the KOMBI. :mad: I downloaded the variant Code, did some changes and flashed the KOMBI. But I did not notice the download error. So at the end I flashed an empty CAFD file. I started from scratch to build my own file and got most of the features running...
  16. BMW Coding and Programming
    Hi all! Yesterday I tried to enable use of the full gas tank. There was an error during the coding and there were lots of errors that came up in esys. Then came the errors in my car. Pedestrian detection. Collision detection. All the displays show EU units. My car is telling me that the...
  17. BMW Coding and Programming
    I have a 04/10 built 2011 535i. I recently purchased a used 6WA cluster from a 12/11 2012 750li to retrofit to my car. I also purchased a CodiProg and believe I was successful in clearing the VIN's from the 160D0WQ chip in the cluster. The mileage was only about half mine so there shouldn't be...
  18. BMW Coding and Programming
    Using: pszdata lite v58.3 E-Sys 3.27.1 I have made some coding changes to my 2016x1 purchased in Canada / F48 (Baureihe F025) on the HU_ENTRYNAV and KOMBI ECUs. On the HU_ENTRYNAV I made changes to enable German Language and disabled the legal disclaimer. I have also changed 3004...
1-18 of 25 Results
Top