Hi guys, I have a 2002 BMW E66 735Li, it came with basic stock all halogen headlights. Every light and every feature like (levelling headlights via the scroll button, fog lights) worked no issues. But since they were in terrible condition and had amber lights, I have changed them with a used...

I recently acquired a 1999 528i wagon. It was owned in California since initial purchase and I brought it to Wyoming. I have had to make some minor repairs here and there but have enjoyed driving the vehicle. It even behaves well in the harsh winters here. Last night when I started the car...

Hey all, I just upgraded my e39 from an LCM3 to a LCM4. Successfully, set ODO, and VIN and recoded with cars ZCF. Then I started poking at the PWM values in PA Soft 1.4 LCM section. I quickly found that this two digit value XX is not a simple pulse width modulation duty cycle value, or a msec...

I went ahead and upgraded my BMW Business CD with Eonon GA9150B head unit last week. :) Installation took about 4 hours since I had to run reverse camera cable from head unit all the way under interior trim, across boot lid cabling and down through number plate section. Also I had a tough time...

Hey everyone, got an unusual one for you. Before we begin, this is my first post so please correct me if I do anything wrong. And yes, I know what I did was not a smart move. Moving past that I hope someone can help me out with this. Car: 2008 BMW 550i (e60) A while back I dropped my key fob...

Vehicle : 2001 540i 6 speed. Symptoms: +Right side turn signals blink in the neutral position. +I have witnessed my left taillight randomly illuminate and stay on after the car has been off for hours. +The headlights have done the same thing. +If I turn on the brights when the car is off...

Wanted to share my recent work regarding how to address a failing Light Kontrol/Control Module. Such a thread undoubtedly exists elsewhere, but here's my take. My symptoms were a headlight (driver side) that wasn't quite as bright white as the opposite. Also, when I turned on the high-beams, it...

Hey guys, I finished my conversion from auto to manual like 3 days ago. I still drive without reverse light.. I want to do it the right way, means that the signal goes through the LCM and DDE because the PDC should turn on when i switch to reverse.. sure i can wire ignition 12v to the reverse...

Hello, I got NCS Expert/Dummy up and running and have activated the daytime running lights. However, as I remember from previous cars, when I do not adjust the light switch I would like the instrument/interior lights to remain OFF. I can't for the heart of me find the right setting. This is an...

I have a 2003 325xi. My issue with the vehicle is as follows: headlights stay on when car is on and only turn off when car is off, nothing happens when I turn the dial to turn it on or off blinkers don't work hazards don't work hi beam doesn't turn on fogs won't turn on instrument cluster...

DSC, Brake, Air Bag, ABS Light ON Ok these lights came on after installing after market m5 auto fold mirrors. I went with the switch mod route. So when I was trying to route some wires through the door panel under neath the glove box going out to the door panel passing that wire connector...

Hi Everyone, Recently I had a complete cooling system failure of the main and auxiliary fans- So the car overheated to redline. I took it in for repair and while driving home (during the day) I noticed a driver-side low beam failure indicator. I thought that perhaps during the process of...

Hello ALL (for LCM help , please scroll down to ******* to see my issue. I just want to give an explanation on what happened) While at work got a call saying my headlights were on. Not sure why because have light setting to turn off when car is off. When i got to car the driver side...

I wanted to have fog lights controls like M3s so i got a M# unit assuming that the inner cabling was the same Pic 1 Old unit Pic 2 Although, I can turn on the light and the rest just fine (the back fog light that believe is located in the same enclosure as the reverse ... red part, that I...

I am going for an inspection and noticed my reverse light are not working, and i want to know is it from the reverse lights switch in the gearbox or LCM??? I have looked at wiring diagrams and the have reverse light going to LCM, but researching online i noticed most have problem with reverse...

hi Guys, I wanted to go for an inspection and i discovered that my reverse light don't work. I tested reverse lights and they don't appear to be receiving any electricity. Any idea where the problem might be? I am a noob at this but i am learning :)

After reading many posts concerning LCM coding I'm stuck and I need some help. So I hope someone can help me out. My wife drives a 540i Touring form januari 2000. We've had the car since 2008 and it's been a real pleassure. But the other day I was on the internet and I could buy the Celis LED...

Hey guys, I'm new here and I drive a 1999 740i. I have a few very important issues that I need help with, the first being a P1475 code. I've more or less put up with it since I couldn't find a fix but now I need to get inspection and the check engine light must go away. I've done some...