BimmerFest BMW Forum banner
manifold
1-19 of 21 Results
  1. E46 (1999 - 2006)
    Hey folks, I'm new here my name is dylan I have a 2000 323ci that I bought a few weeks ago, and I wanted a fixer upper so it has a few issues but nothing I can't fix at the shop where I work. I just need some help with codes and what they mean. I bought a lil $100 obd and readiness code scanner...
  2. E90/E91/E92/E93 (2006 - 2013)
    Hello, my e90 has some serious problems I've been trying to fix for months now. IF YOU WANT TO SKIP DIRECTLY TO MY QUESTION YOU CAN GO DIRECTLY TO THE NEXT PARAGRAPH The car throws no codes other than a VERY rare "DME MIXTURE CONTROL" code. The car stumbles, cuts off, has really choppy...
  3. E60 / E61 (2004 - 2010)
    I've been struggling with what seems to be a pretty obscure issue for quite a while now. After battling with some error codes on my 08 BMW 528xi (thread can be found at http://www.bimmerfest.com/forums/showthread.php?t=758175), I was about ready to give up on troubleshooting the problem when...
  4. E46 (1999 - 2006)
    Hello I recently replaced a TPS Throttle Position Sensor beside the oil pump on my E46 S54 M3. As I removed the sensor there is a aluminum ring behind the sensor which came free, and an -ring behind that which broke in two.. When I ordered a new TPS, there is an O-Ring which sits flush...
  5. E36 (1991 - 1999)
    Hello, I am having a hard time getting used part for my e36. I would need a lower air intake manifold (part number 1247493) for my M43B18 SOHC engine, however, th only ones I could find are for the M42 or M44 DOHC engine (part number 1247263 or 1247265). Can someone confirm if these parts are...
  6. E36 (1991 - 1999)
    Doing a head gasket job and while taking the exhaust manifold most of the studs came out with the nuts. Everybody says to get new ones when putting it back together using the double nut technique. Would it be okay just to use regular bolts instead of studs? Or does it require studs with nuts...
  7. E46 (1999 - 2006)
    Hi, I was removing my swirl flaps, and noticed how gunned up all my manifold was. I decided to give it a good clean, popped some rubber gloves in the engine ports and closed the bonnet. Cleaned the manifold and dried fully. Upon refitting, the port nearest the windscreen was full of water. It...
  8. E34 (1989 - 1995)
    I seem to have forgotten my usual account's information, so excuse the new account. I'm wondering if anyone has, or has information on, a different intake manifold for the M60. I'm only looking to make the engine compartment more aesthetically pleasing, I'm not after performance. I'm looking...
  9. E36/7 Z3 (1996-2002)
    Looking at a 97 z3 4 cyl. Auto transmission,that is for sale. In park, if you rev it, sounds fine. Put it in drive and accelerate and it sounds as if the manifold is severely rattling. Since it doesn't do this at all when revved in park, wondering if it could be from engine and what it could...
  10. Parting Out
    2.4 turbo diesel FORGED crankshaft for sale Greetings: I have a 524td forged crankshaft for sale. This will fit your E28 creating a stroker motor. These are highly sought after and seldom available for such a reasonable price. The journals are standard and I would like $250 for it. Also have...
  11. E39 (1997 - 2003)
    I'm chasing a small oil leak(s) at the exhaust manifold. I replaced the VCG and it's solid. Mirror/flashlight and fingers all show it's dry. I think I'm getting oil leaking out around the threads on the studs holding the manifold to the cyl head. I unbolted the manifolds and in the process about...
  12. E39 (1997 - 2003)
    I drive a 1998 540i I recently started my car due to cold weather, and went back inside. Came back outside maybe 20 mins later and the hood was smoking. I do remember accidentally stepping on the gas pedal down to the medal with a cold engine. Any ideas why it may be smoking? My temperature...
  13. E90/E91/E92/E93 (2006 - 2013)
    Does this mod actually deliver 30 hp, and if it does can someone explain how does it end up having more hp than a 330i. http://www.turnermotorsport.com/p-176947-n52-330-intake-manifold-software-upgrade-for-128i325i328i528iz4.aspx. Btw what was the ration for money to horsepower.
  14. E39 (1997 - 2003)
    hi, i have a 2001 530d e39, i have the intake manifold off and am trying to locate the icv, ive spent over an hour trying to find it but have had no joy. can anyone help me as to where it is and what it looks like, thanks, Andy
  15. X3 E83 (2004 - 2010)
    Hi, I had my 07 X3 3.0D in for a routine service a little while ago and it came back with a list of things to be repaired. Two of these were the breather ( CCV I believe this is referred to generally ) and the intake manifold. Both of these shocked me as I hadn't had any problems with the car...
  16. E39 (1997 - 2003)
    So I bought a 540it with 100k. I replaced the ccv without removing the manifold, pretty easy job. What I did find was oil, brittle pieces of plastic and acorns on the passenger side by the ccv. It is dripping a bit of oil so im assuming its coming from this area, I looked under the car and...
  17. 7 Series DIY
    Issue: Misfire on cylinder 1. Diagnostics: Nothing significant visually or functionally wrong with spark plug, coilpack, injector, nor valvetrain components when viewing with valve cover removed. Low compression found on cylinder 1. Reason: Chipped exhaust valve; chips out of valve allowed...
  18. E36 (1991 - 1999)
    Good morning all. Does anybody know what the hose is called that goes from the brake booster to the top corner of the intake manifold? In a 96 318ti. I can't find it anywhere...and I'm looking hard. Could I just substitute a piece if vacuum line in its place? Of course the line won't have the...
1-19 of 21 Results
Top