BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 57 Results
  1. E39 (1997 - 2003)
    Okay so my car is '01 525i, Automatic, sedan, M54B25. I love this car, bought it 4 years ago from an owner who neglected it for years. I've mended it and it runs heavenly now. There are no big issues with this car in the last couple of years that would leave me stranded on the side of the road...
  2. E60 / E61 (2004 - 2010)
    What are the options if I'd like to disable the complete cruise control function on my E61? Finally decided to install NCS expert, so either if someone knows the codes for just making cruise control not to work without additional fault codes. Or if it's possible to just remove either the lever...
  3. F10 / F11 (2011 - 2016)
    Hello, I have a 2013 BMW 528i(F10) and recently my driver side headlight went out because of water damage. Because the whole headlight house was damaged and full of water, I needed to replace the entire headlight-housing unit. I bought a Hella headlight-housing unit online. The housing unit does...
  4. E39 (1997 - 2003)
    I've had some abs modules lying around and decided to open them up. Now I have found the error cause and it was a broken silver bond (common issue). Next step was taking the old bonds out and replacing them with thin jumper wire. But the problem is, no matter what I do, the solder won't stick...
  5. BMW Coding and Programming
    I need some help, searched with no luck. I am looking for information on programming a module that is communicating but has no UIF file. Car is an 07 E90 335i auto build date 07/07, I had a short that damaged my ibs and Junction box, everything is online now and I am trying to program the EGS...
  6. E82 / E87 / E88 / F20 1 Series (2008 - 2014)
    The driver side knee airbag deployed in my car. I want to replace the airbag. Do I need to replace the srs module?
  7. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Hey Guys, My car needs abs module replacement because the old one behave very strangely and i bought used abs module from eb*y with exact same part number and now my module has arrived. But i still quite confused with module coding or programming for that thing can fit into my car, I already...
  8. F20 / F21 1 Series (2012 - Current)
    Just connected it to a F20 using an enet cable to reset rear brake pad service as it wasnt possible through the dash. Not sure what happened but I didn't have a battery charger on it or anything similar. Now there's no dash coming on and it's not starting. I just have the other ignition on...
  9. BMW Coding and Programming
    Hey Everyone, Not sure if anyone is able to shed some light but I recently performed an EDC delete for a friend as he upgraded to Coilovers and after completing the VO coding of the various modules I was then presented with a driver restraint error and have been unable to clear it using Esys...
  10. E60 / E61 (2004 - 2010)
    Hi All, Need some help for about 2-3 months while driving along when raining or really hot weather my car would bring up all sorts of warnings steering lock fault/Servotronic and others. I ignored this hoping this would go away but yesterday went to start my car and all the electrics started...
  11. E90/E91/E92/E93 (2006 - 2013)
    Hello, Happy New Year! A while ago, the CCC on my 2005 BMW (E91 - 320d, M47) broke. I sent it to a repair shop in the capital of my country. I got it back right before Christmas (with an updated firmware), installed it and noticed that the Aux In and parking sensors were not working. Called...
  12. 7 Series - E38 (1995 - 2001)
    Hi, i have the usual lights on , changed everything so far apart from the module rebuild but have put one off another car same year same engine and still got the same error code so not sure 2 modules can have the same issue. its saying CAN:EGS wheel speed fault. could this just be pure...
  13. F10 / F11 (2011 - 2016)
    Greetings everyone, I bought a 2015 F10 that was totaled in hurricane Harvey as a project car. It had been sitting for 1.5 years prior to me buying it over Christmas. The car needed a new electric power steering (EPS) module, new seat modules (left and right), and a new dynamic stability control...
  14. E60 / E61 (2004 - 2010)
    Hi all, I just took my 2008 520D in to get the iDrive updated. Unfortunately after multiple attempts, the dealer had to give up. They told me that it required 7 modules to be updated and 6 worked fine but the 7th keep failing. The 7th is the "video module". Now, to fix this will...
  15. E90/E91/E92/E93 (2006 - 2013)
    Hello everyone! I'm new to Bimmerfest and would really like some help with a very odd problem. I bought a 2007 335i second hand off of a dealership in another state, and found out that the audio does not work at all. I have no door chimes, no alarm sound, no audio, nothing. But the radio and...
  16. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    Hey folks, a month or two ago I just purchased a 2015 F31 Wagon. I am absolutely loving it so far with one exception: I feel like I was misled regarding whether or not my car had heated front seats. I never bothered to try them until we had pretty much finalized the purchase, and when I was...
  17. E39 (1997 - 2003)
    Hello, I've got a problem with right heater valve. ISTA D shows an error in IHKA module. But when doing 4s test in ISTA D, I can hear a click. Also I took it apart, cleaned the valves and checked it providing external 12V and I could saw valves going up and down, which tells me that valves are...
  18. E63 / E64 6 Series (2004 - 2010)
    Hello all, This is my first time posting on this website, although have done plenty of reading and reading and more reading on different threads. Maybe I shouldn't have read soo much since after I started learning about the "common" issues these cars have, the 3 dreadful lights came on (ALL...
  19. E39 (1997 - 2003)
    Whats is up Bmw Gearheads ! I have been searching and testing different programs for the past 5 hours and i'm looking for some advice from someone who has has this issue and solved it. Vehicle 2001 540i 6 Speed.:) My Inpa will connect to the ecu/dme ONLY. I can access every function...
1-19 of 57 Results
Top