BimmerFest BMW Forum banner
mroadster
1-4 of 4 Results
  1. X3 M, X5 M, X6 M, Z3 M & Z4 M
    Hi all. Currently restoring my father-in-law’s M Roadster. Long story short I have taken out the slave cylinder to be replaced and upon reinstalling and preparing to bleed the line, the clutch is dead to the floor. I can bring it up with my foot it will stay in place but the second I go to...
  2. E36/7 Z3 (1996-2002)
    I have had a rodent chew some wires from the main harness to the passenger door harness. Because of that, my airbag light is on. Normally I wouldn't care but I have to get the car inspected by the CA DMV to get a salvage title. Which color wire(s) going to the passenger door harness control the...
  3. E36/7 Z3 (1996-2002)
    Hi Guys, I have a '99 M Roadster which I modified recently by swapping out the second ASC throttle body for a non-ASC intake boot. As part of the modification, I also removed the motor which actuates the ASC throttle and the sensor which reads the position of the ASC throttle. I have taped over...
  4. E36/7 Z3 (1996-2002)
    Today turned out to be one of the worst days I have had in a while. I was driving home from work, and as I took off from a stoplight I hit first gear then when i put it into second I heard a huge clunk. I look in the mirror and see metal pieces flying all over the road and I feel a weird...
1-4 of 4 Results
Top