BimmerFest BMW Forum banner
ncs expert
1-19 of 32 Results
  1. E39 (1997 - 2003)
    Been having a lot of "fun" trying to program my ASC 5.0 ECU. I have a 1996 e39 540i, I bought a K+DCAN cable with the 20 pin adapter. I am able to access INPA through the 16 pin under the dash, it gives me access to the ECU & TCM and that is all. When I hook the 20 pin adapter up to the...
  2. E60 / E61 (2004 - 2010)
    Hi guys! Need help. I replaced another CCC in my car, somehow, through NCS Expert, I encoded several CAPPL, CAUDI, etc. blocks, and somehow also touched IHKA. As a result, the music worked, but the climate unit does not respond at all to pressing. I read on the Internet that you can reset the...
  3. E90/E91/E92/E93 (2006 - 2013)
    i was busy coding my BMW 335i E92 ,07 For the Combox/CIC Retrofit but i wanted to code the FRM module but coudnt find it anywhere only NFRM but my car isnt coded with that module and if i try to read that module it gives me a error is there somewhere a VODump for my car or how could i find it back
  4. BMW Coding and Programming
    Hello guys I have big problem with coding. I have car two weeks - E60 525i 09/2004 INPA, ISTA, Tool32, WinKFP all working (read clear fault memory, update module or reset LM work) First problem - someone probably delete all FA from car. In NCS Expert (F1, F3, E60, CAS) NCS read VIN from car...
  5. BMW Coding and Programming
    Greetings I have a question about my BMW 320I e90 2005 i recently installed led in my angel eyes and i want to change the brightness values but i cant find the module on ncsdummy or on the cheatsheet, Any help or suggestion? Thanks,
  6. Tools and Miscellaneous
    Acronis Image - BMW ISTA-D, ISTA-P, E-Sys, ETK, INPA, NSC Expert - Best Price + Easy Install This system is based on*Windows 10 x64 with the last updates. What soft inside: E-Sys Launcher Pro ETK 01.2020 Soft for: BMW, Mini, Rolls-Roys. It's working with: BMW ICOM, INPA, ENET ISTA-D 4.22...
  7. X5 E70 (2007 - 2013)
    Hey guys, After I deleted the cats on my 08 4.8i E70, I keep getting a post-cat O2 sensor error with a check engine light.. Is there a way to code out this o2 sensors with NCS Expert? which value do I have to change on my TRC file? Thanks in advance!
  8. General BMW Questions
    Hello, I'm looking for a download of the INPA-NCS EXPERT software. If anyone is familiar Looking for the one that has 4 folders Step 1, 2, 3 and i believe drivers
  9. BMW Coding and Programming
    I recently purchased my 2008 BMW X5 3.0Si an i love it. However, i purchased it with the air suspension deleted and a set of coilovers installed on all four corners. The coilovers ride nice and are adjustable but as expected the "Self leveling suspension Malfunction" code is on the dash. I was...
  10. 7 Series - E38 (1995 - 2001)
    I'm going to help out a friend who needs his steering angle sensor calibrated. I figure I can do that with INPA (if not, I'll fire up the DIS) and my cable (an OBD/ADS interface connected through a real RS232 port). He'd like to seize the opportunity and do a bit of coding. Last time I did...
  11. E60 / E61 (2004 - 2010)
    I seems to get error in NCS Expert COAP-1000 Anybody has this issue and any solution to resolve it? I am using windows 10 64 bit, all other softwares works fine. Thanks
  12. BMW Coding and Programming
    Hi, Apologies if this has already been covered. i have a cable and have use NCS Expert to code my e93. I have now swapped that for a 430d Convertible which I think is a e83, and looking through the threads it seems I now need to use e-sys. Could someone please confirm if this is correct and...
  13. E90/E91/E92/E93 (2006 - 2013)
    Car won't start after registering new battery using Tool32. Then tried to reset the ECU using NCSExpert, via Expert Mode, as it starts to code, after the 2nd or 3rd module, I get the following errors. Translating to english, the error reads: IFH-0009:SG is not connected or is not reporting...
  14. BMW Coding and Programming
    Hi! Today i coded the KMB module in my 2001 e46. I used NCS Dummy and NCS Expert. I turned off the rd feture, because i don't have the valve stems for it, and the error light was bugging me. The coding was successfull, but after coding i have the DSC light on. What do i need to do? Should i...
  15. 7 Series - E65 / E66 (2002 - 2008)
    Hi everyone I recently received my K+DCAN cable and I've done a fair amount of coding on my 745i already. But one thing I can't seem to get working are DRL. I guess DRL is enabled on my vehicle, when I put the light switch in auto, the AE lights up in daytime, and when it gets dark it turns on...
  16. BMW Coding and Programming
    Hi there, new to the forums and would appreciate some help! I have a 2010 MY e70 that I've done some coding with, however, I cannot access my FRM module in NCS Expert. The other day it was in the shop for an unrelated issue and I asked the mechanic to use his AutoLogic to try to read the FRM...
  17. 7 Series - E65 / E66 (2002 - 2008)
    I have done some coding of my E65 car in the past such as allowing the FOB to open/close windows and trunk and even added the digital speedometer to the display. I was trying to remove the legal disclaimer warning, but didn't find the 'TOUT_LEGALDISCLAIMER' keyword that I seen needs to be...
  18. BMW Coding and Programming
    Hi members. I have a problem with my e60 2006. My cruise control doesn't work. It's because the old owner replaced the DSC unit with a used one from a car with ACC and not normal Cruise control even though it's born with normal cruisecontrol. Now the car think it's supposed to have ACC and...
  19. E90/E91/E92/E93 (2006 - 2013)
    Hi, new to the forum. I have a question about coding the CD changer. I bought a GROM-MST4 which needs the CD changer activated and I figured I would code it myself. Doing some research it seemed easy enough using NCS Expert. I bought the cable and downloaded NCS and I am able to communicate...
1-19 of 32 Results
Top