BimmerFest BMW Forum banner
ncsexpert
1-14 of 16 Results
  1. X5 E70 (2007 - 2013)
    Since the upgrade from factory amp (Hifi system - Option 676) with Match Up 7BMW the PDC volume is very loud. Every instrument sound (dong, full hour beep, etc) is loud but the reverse parking sensor is the most annoying. So decided to reduce the volume. There's no CCC menu option to adjust the...
  2. General BMW Questions
    I have a faulty RDC Module and my top mechanic won't touch it because it has to be coded and he doesn't mess with that stuff. I did research and found some good walkthroughs on coding, but started to encounter problems for Windows 10 users. Also in online reviews of K+dcan cables that only...
  3. E82 / E87 / E88 / F20 1 Series (2008 - 2014)
    Hi everyone, I'm almost certain the following statement has been uttered a million or so times in the past, so let me put you in the picture. 2009 135i owner. Driven in the summers. Complete factory spec. Do my own oil changes, brakes, plugs (etc) - everything always going excellent. Checked...
  4. E60 / E61 (2004 - 2010)
    Hello Bimmers, I am about to try Dynamic Cruise control retrofit (SA544) on a E60 523iA LCI from May 2007. To the world's surprise, this car - even being a 5 series - came without cruise control. I already did some coding and programming on my E46 but that ain't like the E60 here :) I...
  5. E46 (1999 - 2006)
    I got my hands on a spare ECU from an Auto E46 (MS43), and I decided to use it as testing grounds for flashing, tuning and that sort of stuff. Now my car is manual, and so I don't think it's a direct swap in. Here is an issue: The car won't start, it is cranking, but doesn't run. Here is what...
  6. X3 E83 (2004 - 2010)
    * Rheingold 3.41 * Inpa 5.0.6 * INPA Fxx Series v2 * EDIABAS 7.3.0 * NCS Expert 4.0.1 (pass: repxet) * AK90 * NCS Dummy 0.6.0.7 * Tool32 4.0.3 * WinKFP 5.3.1 * SP-DATEN 53.3 * BMW Coding Tool 2.5.0 * Dr.Gini - B014 * NavCoder 2.9.18*3 * BMW PassThru Tool Additional info for Pre-FL cars: To...
  7. General BMW Questions
    Hi all, I was trying to retrofit the cruise control in my e70. I have added VO 544 and fa write CAS and FRM. Then coded each modules. The EHB3 is the only module that throw an error message but I recoded it again and worked fine. When I drive the car the screen says 'faulty in drive'. The car...
  8. BMW Coding and Programming
    Hello! I decided to code DRL as dimmed high beams. Everything works, but I got some question: I want to code 'DRL_DIMMUNG'. Then I read all car I see this key in TRC file, but then I select ALSZ module and read it I don't have such key. In NCS DUMMY I see that I need to use LSZ.C37 in NCS...
  9. BMW Coding and Programming
    Hello everyone. I have searched everywhere for the solution to my problem but so far no luck. Any input will be appreciated. I have performed various successful Ex codings, however I am trying to code an e83 X3 using NCSEXPERT but I can't connect, I get a "Vin is Faulty" error. In INPA both...
  10. E60 / E61 (2004 - 2010)
    Hi All If someone can please help, this is driving me nuts. I bought diagnostic package from bmcables.com this is installed on windows 10 using there installer, I want to code the auxiliary input into stereo , I have installed all wiring and came to code it in , I have ncs expert 4.0.1 , inpa...
  11. BMW Coding and Programming
    I've been running into issues with INPA and NCS Expert with my 2005 BMW Z4(e85). I installed the versions that came on the DVD that came with my K+DCAN OBDII to USB cable. Which simply didn't work. I uninstalled and installed the latest version on INPA/NCS/ect. and I didn't have much luck there...
  12. BMW Coding and Programming
    Hello everyone, I had one heck of a time getting the Bmcable.com/bcable.com "one click" software to work on my pc, but I have dont this succesfully, and I would like to share my experience so maybe this will help some people. Details: - Have my own K-DCAN cable, did not buy theirs. - Windows 8...
  13. 7 Series - E65 / E66 (2002 - 2008)
    :dunno:Hey everyone, I know this has been talked about before but all of the links made available on the forums are outdated and no longer work. I bought some cables and some software from EBay recently and the software portion is not working... Anyone know where I can download a copy of INPA...
  14. BMW Coding and Programming
    I created a software pack with the latest versions of software for coding, tested and working. This pack has: BMW STANDARD TOOLS 2.12 Translation for NCSEXPERT 4.0.1 to english Profiles for NCSEXPERT 4.0.1 Scripts for INPA 5.0.6 DATEN V49 for E8X cars integrated with all the software NCSDUMMY...
1-14 of 16 Results
Top