BimmerFest BMW Forum banner

oil filter housing gasket

  1. E60 / E61 (2004 - 2010)
    Hello, Figured I would list the DIY videos I accumulated over the years for the E60. I hope some of you find those videos helpful! Cheers! :drive: - OIL FILTER HOUSING GASKET | OIL COOLER GASKET | TENSIONER | DRIVE BELT - Replace Tail Light Bulb...
  2. E46 (1999 - 2006)
    Hey, there. e46, 2002 325xi, manual transmission. 181k finally in possession of an actual garage so I decided to take it upon myself to do an oil change, swap out my headlight bulbs and put a new gasket on the oil filter housing, b/c it is leaky superfluously. Fan and air intake went off...
  3. E60 / E61 (2004 - 2010)
    Hello Bimmerfest'ers I had a terrible oil leak from the oil cooler gasket and oil was dripping on the belt and oil running on the engine walls making all kinds of nasty smells. I couldn't tell where the oil was coming from initially so if you are having hard time finding a leak, look underneath...
  4. X3 E83 (2004 - 2010)
    Hi, I am getting quoted by an indy mechanic as the following -- is this fair? All include parts & labor Valve Cover Gasket -- $353 Oil Filter Housing Gasket, Vanos Hose, and Steam Clean -- $500 Lower Radiator Hose -- $308 Thanks for your help!
  5. X3 F25 (2011 - 2017)
    I have a 2012 X3. I was told that the oil filter housing gasket is leaking and needs to be replaced, but it will probably cost me about $800 which is ridiculously expensive to me. I have found some people had similar problems, but they got it fixed under the warranty. Does anybody know if it...
  6. E46 (1999 - 2006)
    325xi, 02 model, i have a leak and think it is the oil filter housing where is bolts on to the block, has one had this fixed and how long of a job is it and is there an o-ring kit available?
  7. E46 (1999 - 2006)
    I need to have a valve cover gasket and Oil filter housing gasket replaced in my car.. I have a used car so i don't want to spend too much but again i want to make sure it lasts a while without major issues. So is there any difference between using an original part and not using an original...