BimmerFest BMW Forum banner
oil filter housing
1-18 of 18 Results
  1. E90/E91/E92/E93 (2006 - 2013)
    Hi. I have a 2012 BMW 335i N55. I was fixing my oil filter housing gasket and had to remove this oil hose. I took out the bolt located at the left red arrow in the picture, but I misplaced the bolt and cannot find it, so I have to order it. I have seen people say this is a 12mm hex bolt or 13mm...
  2. X5 E53 (1999 - 2006)
    Good day People of BimmerForums! Thank you in advance for your time and effort! VEHICLE: 2001 X5 M54 E53 THE PROBLEMS: a couple of things. 1. While cleaning the engine my oil filter housing was off and my cover solution failed and I got water in there. What problems am I looking at and...
  3. E39 (1997 - 2003)
    Hello all, My car: 1996 520i E39 engine m52. Maybe this is a repetition of previous submissions, there was no 35 mm head on the store for me to use on the oil filter housing and I opted to use a flexible, wrap-around, tool, one exactly like this...
  4. F10 / F11 (2011 - 2016)
    Hello guys, I have a bmw 535i 2011. Before i do oil change i found oil leftover around the oil filter cap. After i changed oil on friday. I found oil again around the cap. What can this be from? What is the solution?
  5. E90/E91/E92/E93 (2006 - 2013)
    Are there any PC based or laptop compatible programs to be found to help me fix my '06 330 xi? I'm not rich. I need decently priced/free software to fix this connection issue and get to the source of my engine problems.
  6. 7 Series - E65 / E66 (2002 - 2008)
    Hi all, First off I'm somewhat new to BMW's, anyway, long story short, a close friends father passed away and wanted me to have a look at his dad's '05 E65 740Li and possibly bring it back to life, Its been sitting for about a year and a half without being used. ( As far as we know it was...
  7. 7 Series - E65 / E66 (2002 - 2008)
    I need to replace my oil filter housing as the drain plug in the bottom of it is stripped. It currently screws on and off easily by hand. I have purchased and tried 3 new housings and cannot get any of the 3 to thread on. The threads look identical to the old one and for some reason I cannot...
  8. E46 (1999 - 2006)
    I was doing my oil filter housing gasket replacement and I over torqued one of the bolts and accidentally stripped the theads...WHAT DO I DO????!!!!! Oil leaks like crazy
  9. E46 (1999 - 2006)
    I have a 325i with 157,000 miles on it. I don't know much about cars but am slowly learning so bear with me. My car has been leaking oil (about a quart every 2 months/1000 miles). I took it to a mechanic and they put a UV dye in and told me that I have several leaks but the biggest leak is...
  10. E39 (1997 - 2003)
    Was replacing OFH after doing gasket replacement. One hole turned out to be stripped. It is the upper bolt hole with the metal guide for the housing. Was going to do a helicoil but turns out the guide sleeve ID will not permit the driil and subsequently the tap for helicoil to pass through so I...
  11. X5 E53 (1999 - 2006)
    Does anyone have the torque specs for spark plugs, oil filter and oil pan drain plug for 2005 E53 3.0? Thanks in advance for your assistance.
  12. E90/E91/E92/E93 (2006 - 2013)
    Recently I notice a high pitched noise on my 07 BMW 328i e90 N52. There was no noise at idle but when the revs went anywhere above idle 800RPM and above it would happen. After A quick Diagnostic I realized it was coming directly from the oil filter housing. My e90 N52 has been getting the...
  13. 7 Series - E38 (1995 - 2001)
    What's up guys, first post on here, Just bought a '96 740il for cheap money and needed some repairs. After getting the car up and running there is now a steady oil leak when the car is running. I put it on ramps and degreased ALOT of gunk under there. I then started the car, went back under and...
  14. 7 Series - E38 (1995 - 2001)
    What's up guys, first post on here, Just bought a '96 740il for cheap money and needed some repairs. After getting the car up and running there is now a steady oil leak when the car is running. I put it on ramps and degreased ALOT of gunk under there. I then started the car, went back under and...
  15. 7 Series - E65 / E66 (2002 - 2008)
    What's up guys, first post on here, Just bought a '96 740il for cheap money and needed some repairs. After getting the car up and running there is now a steady oil leak when the car is running. I put it on ramps and degreased ALOT of gunk under there. I then started the car, went back under and...
  16. E46 (1999 - 2006)
    325xi, 02 model, i have a leak and think it is the oil filter housing where is bolts on to the block, has one had this fixed and how long of a job is it and is there an o-ring kit available?
  17. E39 (1997 - 2003)
    Okay, maybe it's not THAT bad, but it's getting close :eek: So I'm in the process of tackling an oil leak originating from (big surprise) the oil filter housing on my 2000 528iAT... Now that it's all apart, the old gasket has TOTALLY turned to plastic, some staying on the block, some staying in...
  18. E46 (1999 - 2006)
    I have a 2002 325xi. When i first start the car, it has a weird humming noise coming from the drivers side of the engine. I can feel a strange vibration coming and leaving when i put my hand on the oil filter housing. when i drive the car, it makes a noise that sounds like a turbo or bottle...
1-18 of 18 Results
Top