BimmerFest BMW Forum banner
p1353
1-5 of 5 Results
  1. E39 (1997 - 2003)
    I recently replace my passenger side valve cover gasket. At first the gasket didnt seal properly and was pouring oil out the bottom. I reseated the gasket but now i am have trouble starting my car, it cant idle it dies under 1000 rpm. I am not a 100 % sure i hooked up the spark plugs to the...
  2. E39 (1997 - 2003)
    Topic 2001 540i.: how to get my car running good again. to start with I just replaced the CCV. clean the injectors new spark plugs was running great for about a week all of a sudden check engine light turns on with codes P1341, P1351, P1353. I did check my coil pack and cylinder five and tested...
  3. E39 (1997 - 2003)
    I just got done replacing the vcg and when I went to turn the car on... It was good and then about 15-20 secs after I get a rough idle. Thought it was a coil that was old since all others were replaced, went and got a new one and there is still a rough idle. These codes are new and before I...
  4. E46 (1999 - 2006)
    I had mycodes scanned and came to the conclusion to replace spark plugs, new maf sensor, new intake cps, and cleaned the disa valve. Its running worse now and I have coes: p1345, p1353, p1349, p0313, p0300, p0102, p0340, p0171. So alot of misfire. And still have the same code for the intake cps...
  5. X5 E53 (1999 - 2006)
    So I have a 2002 X5, it's a 3.0 litre (M54) I bought it for my wife a while ago. To make a long story short the MIL light (malfunction indicator light, service engine soon) was on when I bought it. I have worked on cars before, quite a bit, but never a Beemer, so I bought service manual...
1-5 of 5 Results
Top