Bimmerfest BMW banner

retrofit

  1. ICM question

    F07 Gran Turismo (2010 - 2017)
    I been trying since march to activate the LIM function on my MY10 F07 and I am starting to suspect it might be like the ECO Pro that I need a 2012 ICM module. :dunno: How can I go about verifying this without dropping several hundred euros on a ICM? I have tried contacting my local dealerships...
  2. 2013 F10 2G to 4G

    F10 M5 (2012 - 2016)
    Hello All, I just recently purchased a 2013 M5. I cannot use the BMW Assist or Connected Drive because the car is on 2G tech. BMWNA told me to call a dealer to see about an upgrade but I was told that is not possible. Has anyone been able to upgrade from 2G to 4G?
  3. DIY HOD Emulator for Traffic Jam Assistant (TJA)

    F10 / F11 (2011 - 2016)
    Hi folks, As you know, enabling the Traffic Jam Assistant (TJA) feature requires a capacitive-touch sensor enabled steering wheel along with a Hands on Detection (HOD) module which BMW calls "Electronics of Touch Detection". Some of us have been looking into designing a Hands on Detection...
  4. Fxx-/Ixx-/Gxx-series Retrofit of automatic transmission, coding problem HELP

    BMW Coding and Programming
    Hello guys, Recently done auto transmission retrofit on manual F20 pre-lci. All hardware and wiring are present and done correctly - 100% sure. EGS ISN is cleared prior to any coding and connection to the car. Prior to this retrofit checked also compatibility of DDE and FEM with auto...
  5. Retrofit to automatic climate control problem

    E90/E91/E92/E93 (2006 - 2013)
    Hello guys, the previous owner of the car switched from manual AC to automatic climate control. The heating level works, the car is giving cold/hot air depending on the selection (of course it will not keep the degrees, only sends cold, hot air). The problem that I am facing is that I can not...
  6. Flickering display

    General BMW Questions
    I have a 2013 5 series F10 550i. I purchased an NBT EVO retrofit to get wireless Apple Car Play and had it installed by a professional. That retrofit replaced the display and head unit. Since then, I have been experiencing an intermittent issue. After driving about 10-15 minutes, the display...
  7. F10 LCI Gentleman Function retrofit coding

    F10 / F11 (2011 - 2016)
    Hi, can anyone help me on this? I've installed the F01/F02 Right Driver door memory switch for my F10 LCI 520i 2016 intending to retrofit the Gentleman Function. I've tried coding my Driver Seat Module to GENTLEMAN AKTIF, but i still couldn't get it to move the passenger seat. I've attached...
  8. Can I retrofit another series engine for a 2012 F10 N55 ?

    F10 / F11 (2011 - 2016)
    I need some of you expertise... I need to replace an engine in a 2012 535i, N55, REAR WHEEL DRIVE, 2012-04-26 production date. It believe it spun a rod. My question is about retrofit an engine from an another series? I don't know if the major components would line-up, the manifold...
  9. F020 (F02x, F03x, F08x) I-Level flash

    BMW Coding and Programming
    Hy guys. i just wanted to flash my 2014 F22 228i from I-Level 14-03-503 to 19-07-530 now i got this message in E-Sys In english: "The TAL contains transactions for installing and removing hardware, so an individual data recovery is carried out. If the coding / programming transactions are to...
  10. E-Series e60 ISTA/P software update, no combox -- HELP!

    BMW Coding and Programming
    Can someone please help me fix this? I am very familiar with all of the tools, but after 3 weeks of searching for an answer and I am finally asking for help. Thank you! I have a retrofit 2007 e60 with the F10 CIC. (I got it about a month ago, and someone else had done the retrofit). Everything...
  11. F020 (F02x, F03x, F08x) retrofitted NBT coding questions I-Stufe

    BMW Coding and Programming
    Hello guys, I retrofitted a NBT_HU into my F20 LCI from end 2015. The original device was an entrynav that had some audio issues :/ I bought the FSC online so Navigation isn't greyed out anymore. After that I tried to FA Code the NBT i got an error message that's like: HU_NBT 63 Coding...
  12. F015 / F016 / F085 / F086 X5 2017 F15 - Retrofitting Active Lane Keeping Assistant

    BMW Coding and Programming
    I have LDW (KAFAS2) and TJA I wonder if somebody tried it, and if it is at all possible to retrofit active lane keeping assistant? I guess since the car does steering for TJA, and it is able to detect lanes it should be possible, and that only some coding would be required?
  13. RDC retrofit.

    F10 / F11 (2011 - 2016)
    Dear Friend, Recently I have retrofit the pressure control to MY2014 520d. It works only when I unplug and plug in the controller once. The system will reset itself and work normally. But it said RDC system malfunction once I restart the engine. It seems that there is no hardware problem...
  14. F001 / F006 / F010 Retrofit towing hitch with AAG

    BMW Coding and Programming
    Hello, First of all, I am a total newbie in coding BMW. So i have been google-ing and reading a lot on this fine forum, but I cannot seem to find a solution for my problem. I sincerely hope that somebody can help me out. As I've run out of ideas. I have a F11 BMW from 2014. I retrofitted an...
  15. F001 / F006 / F010 HC2 module - installing matching FW again?

    BMW Coding and Programming
    Hi everyone, I've retrofitted blind spot monitoring on my 2015 F11. The modules were from 2012. After replacing the ZGM I initialized the flexray. The SWW module was visible in Rheingold, but there was no possibility to inject CAFD into it in ESYS. I decided to try and update it to my car...
  16. Retrofit NBT from CIC F11 2011.

    F10 / F11 (2011 - 2016)
    Hi :) I've got a crappy CIC today, and I want a NBT again, like my last BMW. I found this on Ebay. The ad says "PLUG AND PLAY IS AVAILABLE FOR THE CARS STARNING FROM 2012-7 YEAR RELEASE". I asked him what to do with my car, it's produced 2011-08-24. He said it still was plug and play, but I...
  17. Fxx-/Ixx-/Gxx-series New CIC Head unit programming F30

    BMW Coding and Programming
    Hi, I have just installed a new CIC head unit into a BMW F30 2012 series. Previously it only had the business unit with the small display. The installation process went OK and the unit works OK. Now i need to programm the new unit with my car. I have some basic knowlage with coding, i did...
  18. All BMWs E70 Stereo to Top-Hifi retrofit CODING problems

    BMW Coding and Programming
    Hello, just did a stereo to top-hifi retrofit, and ran into some problems. First of all I have replaced complete harness from trunk to front, changed speakers, added DVD Changer and amplifier. Then supplied both dvd and amplifier with power supply (those was missing, becouse the wiring harness...
  19. Surround view retrofit on an F36?

    F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    I have read the two great posts about the surround view retrofit on F30s (3-series), but I have a 2018 430i Gran Coupe that I have collected a bunch of parts to begin the surround view retrofit, and I realize there are minor differences. I am wondering if anybody has done the retrofit on the...
  20. Best OBD cable + software for a noob to do DIS and EBA

    E46 (1999 - 2006)
    I am new to this and I am looking for a cable and software for my E46. As far as I can see the cable isn't so much of an issue, as I can find plenty which have the protocol I need (K-line I think ?), but it is the software that I don't know where to find or what to pick. People sell some on...
Top