Search Results for ‘rheingold’

Hello guys, i am having the above issue with my F10. ISTA+ unable to communicate with the car using ENET cable. on my laptop the network LAN adaptor is set to automatic. ISTA+ is set to use EDIABAS.ini and also tried with ENET option, both doesn't work. i have also edited the...

Hi guys, I just wanted to ask if it's possible to let me know which is the last version of ISTA D that has a working Basic Features tab? I tried to enable it on my 4.31.4 version and it did work - it showed up. However, it only works for vehicles up until around e46 after that it tries to open...

The Flat Tyre Monitor (RPA) failure just appeared on my iDrive screen this morning when I started the car. :cry: I read the code with ISTA+ / Rheingold and read the code "48070C" with a description of "Tyre failure indicator: Data implausible." I have read posts about changing the ABS...

* Rheingold 3.41 * Inpa 5.0.6 * INPA Fxx Series v2 * EDIABAS 7.3.0 * NCS Expert 4.0.1 (pass: repxet) * AK90 * NCS Dummy 0.6.0.7 * Tool32 4.0.3 * WinKFP 5.3.1 * SP-DATEN 53.3 * BMW Coding Tool 2.5.0 * Dr.Gini - B014 * NavCoder 2.9.18*3 * BMW PassThru Tool Additional info for Pre-FL cars: To...

Hi, I have just bought my F11 520dat and I am very pleased with the car. However like everything else in this world, eventually it will start to have problems. Then I would need a diagnostic tool in order to find what the potential problem is. Can you guys guide me to which tool is the best...

Hello. I've finally started first attempts to code my G30. My first stop is to figure out if I have a WLAN aerial (antenna) so that I can without interaction with hardware, enable CarPlay and Screen Mirroring. I've connected to the vehicle via Theingold tool (ENET cable) and scanned to see the...

Hi All, Hope everyones OK. This is my first ever post so please go easy! :) My details, BMW X5 2004 4.4i adapter : K- DCAN usb 2008 driver installed as heard new one doesnt work. Operating system on laptop: Win 7 x64 Guys, I am having a major headache with the Rheingold installation -...

Hi Guys! So this is a little bit tricky one for me and was hoping someone here might knew something about ISTAD. I have this BMW E39 M5 that once was a 528, and has been built up from scratch, as i bought it this way. I bought rheingold ISTAD and ISTAP a while ago, and until now i have only...

Hi, I'm new here and already have a question about Rheingold ISTA D. Everything is installed with the SQLiteDBs files in the correct folder. It's works... but I can't do test plans? Is something missing? I also tried to "unblock" the zip files but couldn't find unblock option when I looked at...

I have a 2011 bmw x5 and i have a few codes that came up on rheingold and wanted to know what you guys think CODE-005f49 DSC: Instrument Cluster :Interface CODE-00E5C4 CID, K-CAN: Line Fault CODE- No Message ( Control valve in the air conditioning compressor, 0x2D6)

I have a 2011 bmw x5 and i have a few codes that came up and wanted to know what you guys think CODE-005f49 DSC: Instrument Cluster :Interface CODE-00E5C4 CID, K-CAN: Line Fault CODE- No Message ( Control valve in the air conditioning compressor, 0x2D6)

Dear all, for all out there who are able to install and use Rheingold ISTA-D , I have a small favour to ask. I am (desperately) after the detailed wiring diagram for the trunk lid power lock drive actuator (p/n 51 24 7 269 516) and the trunk lid electric spindle drive actuator (p/n 51 24 7 298...

BEGINNER'S GUIDE TO BMW ISTA+ (INTEGRATED SERVICE TECHNICAL APPLICATION) This beginner's guide was created considering the number of questions that have been coming up recently whether related to installation, configuration and/or usage. The guide attempts to answer fundamental questions on...

Howdy folks! I am making this a thread as there are quite a few out there that have mentioned the same issue with none of them (that I found) posting resolution...well I am hedging my bets and saying ours has been resolved via the use of Rheingold. Here are the details: A few weeks...

Hi everyone- I purchased an OBD2 to USB cable when working on e46s. The information I read for it said it would work through 2008 vehicles. Could someone plz let me know if there is a cable that could cover from 09 through at least a couple of years into the f series? If not, would also...

Hi @ ALL I´ve just got Rheingold running so far. In the documentation section, there are a lot of Quicklinks / Hyperlinks. But they don´t work.... nothing happens when i click or double-click on the blue-underlined links. With the right-click action from mouse i can see, that it is a...

Hello guys. I am hoping that some one will be able to help me out on this issue. I am sure its something minor that I have to do, its just not jumping at me. I have installed Rheingold. I am using obd2 enet cable. Cable works fine as I have installed esys and I am able to code my car with no...

Hello guys I can't see the "ISIS hosts or IPs" tab like in this photo; My rheingold is like in the photo below; I've already checked and modified "ISTAGUI.exe.config" but nothing changed. What can I do to see it like the photo number 1?? Any help will appreciated

NOTE - PARTIALLY SOLVED! Hi, I have been having some fun with my new (to me) 740D M Sport. I got hold of a copy of Rheingold 3.14 and an ENET cable, and read the fault codes in the car. I have managed to sort out the side view camera issue (plug the cable back into the camera!), but am left...

Hi There, I have recently bought an F01 740d on an 11 plate. It has one of its sideview camers out, and i want to diagnose the error, as well as check the car out for any other faults. I have had an E38 and E39 in the past where i installed INPA and used a cable Shack EDIABAS USB interface...