Traded in my 2014 M6 and have some performance parts for sale. I have BMS Elite M5/M6 S63TU Intake, DTE PedalBox, BMS Wheel Spacers, BMW / MINI Floor Jack Pad Adapter, All weather OEM BMW floormats, trunk liner, wind diffuser for convertible M6.
This ad is for spacers. Other ads and more photos...
I couldn't wait to do this and I'm so happy with the result! New wheels, lowering springs and spacers made a huge difference in how the car drives and handles higher speeds and of course it looks much better as well! Detailed DIY for anyone wanting to attempt the same:
I got some Beryern rims for my E38 740i off of a E9X 650i. The strut and rim rubbed. Boiught a 10mm spacer kit and order 30mm lugs. The spacers seem to be taking more than 10mm. They are 10mm thick, the hole for the center bore has a bevels edge which does not allow a close fit. Maybe this is...
I purchased the F30 wheel spacers from BMS, but they accidently sent me the E series spacers.
They sent me new extended lug studs for the F30. I asked if they wanted the E studs back and I never got a response, so I’m giving them away for free. You just pay for shipping.
Two sets are for...
So Im Buying Lowering Springs This Weekend, And I Have Done Hella Research On The Matter And Finally Decided To Go With H&R, But I Can Not Make Up My Mind Between The Race Or Sport Springs... I Really Want The More Slammed Look So I'm Most Likely Going To Go With The Race Springs That Will Drop...
Hi, I am new to this forum so sorry for the newbness but I wanted some help towards getting the perfect fitment for my car. I got mags 18x8 with an offset of 35 not on the car yet, and before I buy spacers I just want to make sure I buy the right ones. So in order to get the perfect fitment...
Rims (18's) offsets are:
I have 20mm spacers & 15mm spacers
Final offset for 15mm spacers would be:
Final offset for 20mm spacers would be:
What setup would be safe to use? or should I mix them, 15mm spacers for the Front and 20mm spacers for the rear ?
Hello friends, just purchased a 2008 650i with stock 19" sport wheels. I noticed the wheels sit a little to far in for the wheel wells and would look nicer if they were out a little more. I have been doing some research and heard from 2 sources to use 10mm rear and 12mm front. The problem is...
I rolled the fenders for my 2005 BMW 545i, and I did an alignment when I bought new Falken FK452 tires 285-25-20
I drove only 10K miles, and one of my rear tire needs to be replaced now. The inside part of the tire split and it doesn't hold air anymore.
Does anyone have any suggestions?
Hi everyone! I am a new owner of an Austin yellow F82!
I want to add spacers to my front and rear wheels for a more aggressive look. I don't know which space size is best . Can anyone give me a recommendation?
I loooooooooove this beast!!!!!!! :)
This are specs for the wheels I purchase: 5x105-130 Bolt Patterns, 74.1-110mm Hubs
Car is 2009 BMW X6 Xdrive50i, It has two different hub sizes.
2009 BMW X6 XDRIVE 50I
Bolt Pattern: 5x120
Hub Size: F-74.1/R-72.56
Lug Nut: 14X1.25B
Lug Type: BOLT
Offset Type: HIGH
Offset MM: 35-45
I have a M4 with H&R Sport Spring.
I am looking for spacers but not sure about the width.
Will 13mm H&R spacers be too wide?
I don't want the tires to rub against the wheel arches!
Please help out if you have experiences.