About a month back I was able to fix an DSC issue by replacing the contact brushes on my steering angle sensor. Worked like a champ. However, just this week I got a restraint error and none of the steering wheel button and horn work. I removed the clock spring and found the ribbon cable crimped...
(428i) So I’ve been having the dsc, adaptative headlight malfunction, and chassis stabilization errors off and on for a while. I pulled my steering wheel off and cleaned all that out in there. The clock spring ribbons fell out 😭 but I think I got them back in correctly…. Got everything put back...
I have had this error for a while and i would like to find out why i keep getting it and i'm not able to clear the code since it keeps coming back. The code is 94F6 SZL: Steering-column adjustment switch open/short circuit to positive. My steering column adjustment is manual. After...
I've bought a car with problems, trying to solve them.
Now I'm stuck with problem with SZL codes.
INPA reads ''94CD'' and ''94D8'' codes.
Can anyone please specify what these codes refer to? What is giving the error?
I can't find any good information.
Car: e61, 2005, 3.0d, 160kw,
I've installed new restyling SZL from LCI into my F30 2016.
SZL part number is 61316996593
This SZL has fixed position switches for turn lights.
It's required a correct coding. Because now switches are working as none-fixed position.
Could anybody help with correct coding?
Today I decided to setup ISTA/D -Rheingold to go back and tackle this fault, since I was told and done research that this couldn't be fixed with INPA.
Ive had this error on the dash ever since I got the car, and ignored it, steering alignment is slightly off by 2 hairs as far as I can tell...
I am hoping that someone can give me some advice or assistance.
I have a jap spec 2006 e60. I am in the Caribbean.
The car has like 24k on the clock, hardly driven.
For years however it's had the active steering error showing up. The steering more recently has become off centered...
New to forum and need help with heated steering wheel retrofit on F25
I have replaced all the hardware that I believe is required:-
M sport steering wheel with heat.
Steering wheel control module
Steering column control switches ( clock spring ) with connectors for heat
Ok, I have an update - but still really need your help.
I've managed to change over my SZL today and broadly speaking everything is ok - apart from 1 thing...
My paddle shifts have stopped working.
If you pull on both paddles then the dash switches to manual and increases by 1...
Anyone have a donor SZL for cheap, or real cheap (free, less shipping of course!) ?
I have the "Drive Control" error with the turn signal shut out happening. Last night I took it apart and see that the little brushes on one of the four contact arms is not there at all.
Getting down to the...
I had check engine light on my 2003 745i. I took it to the dealer and got back a list for $3,000. I had a "Transmission failsafe " message and this was the main reason why I took the car. I did a full inspection on the car and this is what I got back
:)Complaint: Automatic transmission...
I am sure many of you have experienced the SZL issue.
With my car it started within the first 4 months since I bought it new.
The wipers turn on automatically and do not turn off until the ignition is turned off.
All sorts of errors start to popup:
Airbag and belt tensioners functions are not...