BimmerFest BMW Forum banner

vvt

  1. 7 Series - E65 / E66 (2002 - 2008)
    Hello, I cannot find anywhere the how to program a used VVT (ValveTronic Module) to the car. I have a customer here with P1056 2A3F DME: Valvetronic, actuator motor: power supply code. We tested all powers and ground with the wiring diagram and everything is 100% OK. Then we took the VVT module...
  2. E46 (1999 - 2006)
    Hi, i have a E46 318i from 2004, engine code N46B20A, engine oil Motul X-cess 8100 5w40 LL-98, 272.000km, about 169000 miles and the Check Engine light with EML light appears, but sometimes after delete the errors just Check Engine, i check with INPA and this errors appear: 2A70- Error curent...
  3. E90/E91/E92/E93 (2006 - 2013)
    So I thought I was savy with BMW, worked on all years and models for years. I had a neighbor with a 2010 328i who I agreed to help by performing a pretty simple valve cover gasket install. Well prior to doing the work, I never started the car or moved it, my mistake. I go to start the car after...
  4. General BMW Questions
    I know you can buy software and related hardware to hookup your laptop to the OBD-II port of a BMW. Can someone point me in the right direction of a software that would allow me to set the stop points of the Valvetronic motor using a Macintosh laptop? I have a 2007 BMW X3. I could use Windows...
  5. E46 (1999 - 2006)
    Hi Guys, I would really appreciate it if someone could help me out on diagnosing the VVT motor. I hooked my car up with INPA/DIS and it came up with 2 codes: 2862- Variable valve gear- voltage supply, power output stage- Deactivation faulty- Fault currently not present- Servomotor & 2865-...
  6. E46 (1999 - 2006)
    Hi all, I was hoping someone could save me spending hundreds on the following problem. My car keeps cutting out when upto temperature and driving at constant speed. The battery light, ASC and amber brake light come on. Usually it restarts straight away and runs fine for a while before cutting...
Top