BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 23 Results
  1. BMW Coding and Programming
    I have an 2011 r60 Mini Cooper and want to use winkfp to reprogram the radio which has zb number 9218837. I try the search in winkfp and it doesn’t find the number. I tried loading the r56 and e60 and neither work. Everything I read online it shows you also copying files from one folder and...
  2. BMW Coding and Programming
    Good morning guys, I am new to programming and coding. I have just updated all my modules of my E60 525i 2.5L via winkfp as it was never updated since 2006 (manufactured date) I think i messed up with DME, tried reset adaptation but no luck. Also i noticed mileage needle when i released the...
  3. E60 / E61 (2004 - 2010)
    Good morning guys, I am new to programming and coding. I have just updated all my modules of my E60 525i 2.5L via winkfp as it was never updated since 2006 (manufactured date) I think i messed up with DME, tried reset adaptation but no luck. Also i noticed mileage needle when i released the...
  4. BMW Coding and Programming
    so i think i need a new DSC module. i have been having a problem with the condition based service randomly setting itself to %250 brake pad life on the front and rear axle and setting a warning on my dash. Using ISTA/D to reset the CBS of the front and rear brakes it mentioned in the test plan...
  5. BMW Coding and Programming
    Hello! I am Alexander and I am from Austria. This is my first post and I hope I post it in the right section of the forum. I am a little bit new to winkfp so I need help please. I have an 325i N53 and we will change the intake manifold to the one from the 330i. Now I should flash the 330i...
  6. BMW Coding and Programming
    I just bought a nice E60, but it has the S843 option that reduces engine power. But I want full power! :D To remove S843, I first remove VO code with NCS Expert. Then DDE must be recoded with WinKFP using a ZUSB that is not power reduced. Can anyone help me find the correct ZUSB? Or give me...
  7. BMW Coding and Programming
    Hi as ive just went through a minor hurtle ive wanted to share this experience with all of you. just to clearify im not a coding expert, however i am working with it on a daily basis. A customer just rebuild his old 2001 E46 320i M54B20 with a donor engine M54B30 and control unit. (this donor...
  8. BMW Coding and Programming
    Hi everyone, I'm seeking some insights on a technical issue. First, some background: I bought a E60 520d recently as well as an ICOM NEXT (genuine) that I share with my dad for diagnostics and retrofits. Using WinKfp 5.3.1 and ediabas 7.3.0, I managed to upgrade all the modules that Ista-P...
  9. BMW Coding and Programming
    Hi guys, I am new to this forum but have been getting a lot of info from it. So I updated my EGS module to get rid of the 2-1 hard down shift with the DIY on this forum which can be found here: https://www.bimmerfest.com/forums/sh...d.php?t=621988 I believe I did everything correctly with...
  10. E60 / E61 (2004 - 2010)
    Let me start with by saying, I've had this code pending every since I had the car, never went away after clearing the code but only if it was hot outside and car was up in temp. Recently, I've updated some modules on the car usng Winkfp and now the code isn't there anymore and engine light is...
  11. E60 / E61 (2004 - 2010)
    Hello PLease please help. Long story short after tranny rebuild and valve body rebuild same issue red cog and limp mode. I have a 2005 545i. tranny is zf6hp26 Tried updating the ECU GKE194 using the WinKFP. The fies were the same so I thought why not. During the installation the app crashed...
  12. BMW Coding and Programming
    do you know where i can find the old versions of SP-daten files for E89? i have reitorfitted cic controller to my car, and tried to change the VIN# to be fitted to car. however unable to find the assembly# (zb#: 9213309, Mdate: 3-6.2009) from the latest daten file. really appreciate if you...
  13. E90/E91/E92/E93 (2006 - 2013)
    do you know where i can find the old versions of SP-daten files for E89? i have reitorfitted cic controller to my car, and tried to change the VIN# to be fitted to car. however unable to find the assembly# (zb#: 9213309, Mdate: 3-6.2009) from the latest daten file. really appreciate if you...
  14. 7 Series - E65 / E66 (2002 - 2008)
    When i got my 2002 745i, the fm/am radio didn't give any sound. Signal strength was 0 in inpa, so after searching i got a the right tuner and it worked directly! Now i changed the vin of the tuner to the vin of my car with tools32 and winKFP, but after flashing with winKFP the tuner stopped...
  15. E60 / E61 (2004 - 2010)
    I decided to give this a try, and I successfully updated a couple modules KOMBI AMP DME/DDE Then after seeing how quickly these modules updated I decided to go ahead and update CCC module.... 1st attempt it failed - BMW logo stuck 2nd attempt it failed again, but this time it messed up my...
  16. E60 / E61 (2004 - 2010)
    Just curious, has anyone with a ZF 6HP26 tried the Alpina B5 S transmission flash? The ZB number is 7592124. It's intended for EGS part number 7591972. To check the part number in INPA, go to E60 -> Select E60 -> Functional Jobs -> <F2> Identification. INPA will identify all installed control...
  17. BMW Coding and Programming
    Hello everyone, I had one heck of a time getting the Bmcable.com/bcable.com "one click" software to work on my pc, but I have dont this succesfully, and I would like to share my experience so maybe this will help some people. Details: - Have my own K-DCAN cable, did not buy theirs. - Windows 8...
  18. E46 (1999 - 2006)
    Hi I recently diagnosed my sons 318i Auto to have a TCU (transmission Control Unit) problem. The initial problem was a pair of issues. battery going flat(I will explain) and the car randomly having shift problems. The trans fail light would come on and shifting gears was amazingly abrupt. so...
1-18 of 23 Results
Top