BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. BMW Coding and Programming
    I bought a used ZGW-02 4SK gateway, which i want to use in my setup. The problem is, the ZGW comes from an F25 and has an F025 I-Step, but the G02 has the S15A I-Step. I read many tutorials on how to upgrade the I-step but that's always just and update from F025-15-... to F025-20-... or similar...
  2. BMW Coding and Programming
    hi I bought an used ZGW02-8SK and I want to power on and flash it: 1. 4 ethernet wires to OBD: directly connect these 4 ethernet wires to RJ45 port without OBD ---> and connect it to PC RJ45 port 2. two CAN wires for K-CAN2 High + Low , using an raspberry PI with MCP2515 to send CAN message 3...
    zgw
  3. BMW Coding and Programming
    Hello :D I'm trying to understand some stuff, so this is going down as a R&D topic. I've got a HU_Entry (2014) off a F10, I want to read and edit the FDL via esys using the Quadlock Eth connection. The issue is that my headunit is sending ARP frames (Wireshark logs) and I can see it's IP, but...
  4. BMW Coding and Programming
    Hi all :) I retrofitted an NBT in my E61 a year ago. It's been working fine, but I always had a plan to retrofit an ZGW in addition for coding and upgrading. I got hold of wiring schematics, and everything is wired now. I can access the zgw from e-sys and tool32. It originally came from an F07...
  5. F10 / F11 (2011 - 2016)
    Hi, Would like to swap my current ZGW-02 4SK for a 8SK one. Does anyone know how to program the new module? The hardware replacement itself is not difficult, it is only the programming and initialization part that I'm concerned about. I need to replace it because I want to retrofit both PMA...
  6. BMW Coding and Programming
    Long story short.... Flooded car, someone monkey with it an make it run by swapping totally different parts till the car started: modules that they throw at it till they got the car running are: 1. ZGW-High (metal box) - car came with ZWG2-4SK 2. JBBF and the entire fuse panel 3. SZL 4. FRM...
  7. BMW Coding and Programming
    Hi, After VO (5AC) high-beam assistant need to re-code ZGW because I even replaced the Steering column switch cluster to have the extra butoon for activate it, but when I choose ZGW in e-sys the code button is not active. Do I missing something?
  8. BMW Coding and Programming
    Evening guys, So I've got myself in a world of pain and late nights. Retrofit HBA on my F12 through VO some months back and finally fell on a replacement SZL on ebay that sold for a steal. After physically changing over SZL, I quickly found that everything worked - apart from my paddle shifts...
  9. F10 / F11 (2011 - 2016)
    Hi, This is my first post so be gentle :) I've recently purchased a NBT retrofit kit for my 2010 F10 from here: http://www.germaniks.com/bmw-nbt-retrofit/bmw-f10-nbt-retrofit-2010-2012 The kit is advertised as plug and play and comes with a Enet cable for remote coding. From the emulator...
  10. BMW Coding and Programming
    Hello guys. I´m going to retrofit adaptive LED Headlights on my 2010 F10. It seems to be difficult, but possible. Right now I have the headlights, a new FRM3 and a KAFAS2. But I´m unsure which ZGW is the correct one. Normally I dont want to Change my CIC to a NBT. But the New ZGW-02 8SK hase...
1-10 of 10 Results
Top