BimmerFest BMW Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
i was told that the 32mm nut on the fan that you could use a 1-1/4 wrench, but it wouldn't fit. I mean i could drive it on but that's not good so i just wanted to let everybody know that a 1-1/4 won't fit!
 

·
D'oh, You Kids!
1984 633CSi, 1985 635CSi, 1985 325e, 1987 325is, 1993 325is, 1995 318is, 1995 M3, 2003 F150
Joined
·
31,082 Posts
Welcome to Bimmerfest!

No, a 1-1/4" wrench won't work. 1-1/4"= 1.250. 32mm= 1.259". 0.009" too big.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top