BimmerFest BMW Forum banner

335i Wheel Offset and size to push rears out....

2143 Views 1 Reply 2 Participants Last post by  dkreidel
Trying to figure out the best off-set and size to push the rear wheels out so that they are more flush with the car.

Looking at both 18's and 19's.

Thanks,
1 - 2 of 2 Posts
offset is dependent on wheel dia and width. Coupes/verts and sedans require slightly different offsets to bring the wheel face "flush" to the fender. We need a lot more information to help you, or you may want to give one of the board sponsors a call.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top