BimmerFest BMW Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
44 Posts
I did one to the right rear wheel carrier when I discovered the integral link bolt was stripped out. Not a lot of room, removing the wheel liner doesn't really help, so I had to drill out the hole and retap it by hand. Still pretty easy.
 

·
Under the lift arms
Joined
·
13,019 Posts
time serts are better then heli coil but the process of making a hole's diamater larger to accept a thread insert is the same,


you could just weld it close redrill it.. and thread it ;)
 
1 - 6 of 6 Posts
Top