Bimmerfest BMW banner

1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1 (Edited)
Hello,

I programming a BMW i8 from 2014 to the lastest 18-11-520 i-Step. Ista shows me a ACSM4i and E-Sys a ACSM2 at the SVT ECU list.

I already tried it with E-Sys and Tool32 ( ACSM 2, 4, 4i and 5 prg files) but nothing happens on lock write. In the 4i prg file there is no write lock function. The same issue at Ista+!

Ista+ shows at the ABL a good connection to the ecu but says "need to be initializing / wrong coding Files". I already remove the cafd and cdeploy again.


\\EDIT:

Problen solved.
STEUERN(ARG;VERRIEGELUNG_SG;0)
After sleep FS_LOESCHEN, IS_LOESCHEN
 
1 - 2 of 2 Posts
Top