BDC (Body Domain Controller).

 

Shawn, I saw previous posts and looked in BDC but I couldn't find it in search by description of options.


Sent from BimmerApp mobile app

 

Most of these are still there. Make sure you click the top of the CAFD before you search.

FH_Tuerauf_stop_maut = uninterrupted window operation

NSW_AUS_BEI_FL = fogs allowed with high beams

Haven't yet figured out the halo brightness, but frankly haven't looked. I can take a look later on.

 

You are right, I found FH_TUERAUF_STOP_MAUT, but couldn't find FH_TUER_AUF_STOP_MAUT. If I am not mistaken there are two things to change.

- Opening doors will not interrupt window roll up (Front and Back)
FRM => 3030 => FH_TUER_AUF_STOP_MAUT => nicht_aktiv
JBBF => 3070 => FH_TUERAUF_STOP_MAUT => nicht_aktiv

And yes, I did clicked on top of the CAFD before I submit search.

I would appreciate any help, thanks!

 

Did you test it?

In F15, it is likely only FH_TUERAUF_STOP_MAUT is needed for both front and rear interrupts.

 

Did you test it?

In F15, it is likely only FH_TUERAUF_STOP_MAUT is needed for both front and rear interrupts.

For the rear windows no interrupt

BDC>3051 FH_tuerauf_stop_maut_rear

 

I did not check back, but confirmed it is working in front.


Sent from BimmerApp mobile app

 

Rear lights on with DRL on F15:

FDL:
BDC_01 > LceLampMapping3 3064 > MAPPING_TAGFAHRL_1_H_L_OUTPUT = sl_l
BDC_01 > LceLampMapping3 3064 > MAPPING_TAGFAHRL_1_H_R_OUTPUT = sl_r
BDC_01 > LceLampMapping4 3065 > MAPPING_TAGFAHRL_2_H_L_OUTPUT = sl_2_l
BDC_01 > LceLampMapping4 3065 > MAPPING_TAGFAHRL_2_H_R_OUTPUT = sl_2_r

or VO-code:
add 8TL
code BDC

 

Rear lights on with DRL on F15:

FDL:
BDC_01 > LceLampMapping3 3064 > MAPPING_TAGFAHRL_1_H_L_OUTPUT = sl_l
BDC_01 > LceLampMapping3 3064 > MAPPING_TAGFAHRL_1_H_R_OUTPUT = sl_r
BDC_01 > LceLampMapping4 3065 > MAPPING_TAGFAHRL_2_H_L_OUTPUT = sl_2_l
BDC_01 > LceLampMapping4 3065 > MAPPING_TAGFAHRL_2_H_R_OUTPUT = sl_2_r

or VO-code:
add 8TL
code BDC

What does it exactly do?

Sent from BimmerApp mobile app

 

It keeps tail lights turned on when daytime running lights (angel eyes / corona rings) are active.

 

Glad to hear it healed itself.

 

Did anyone figure out how to code the taillights to run with the Daytime Running lights on the F15 yet?

 

Try adding 8TL to vehicle order and vo-code BDC-module.

Edit. Check post #46 on this topic.

 

My apology for not reading around the forum. But here is the link of the cheatsheet that I started.
There are some updates needed, I will do it in a bit.
https://docs.google.com/spreadsheets/d/1F1cGyhwl5gXU74g-avy4z7Wrif8FffhfZoGxHVye9s4/edit#gid=0

One thing I found out, the rear taillight DRL didn't work with Non-LED car. Still need to do more testing.
Also, the DVD in Motion didn't work on the new firmware, MY 04/14+, maybe someone can help me. I've read about it somewhere and going to search for it again.

 

...
Also, the DVD in Motion didn't work on the new firmware, MY 04/14+, maybe someone can help me. I've read about it somewhere and going to search for it again.

Video-In-Motion:

HU_NBT => VIDEO_HANDBRAKE => nicht_aktiv
HU_NBT => VIDEO_FRONT_LOCKED => nicht_aktiv (If Present)
HU_NBT => VIDEO_SPEEDLOCK_CONDITION => none (If Present)
HU_NBT => SPEEDLOCK_X_KMH_MAX => Werte = FF
HU_NBT => SPEEDLOCK_X_KMH_MIN => Werte = FF

 

Thanks Shawn, I'll give it a try when the guy coming back next week.

 

Sorry to resurrect this thread again bit was trying to get some help on coding auto fold side mirrors with the keyfob on a new F15. Used r33's cheat sheet on google docs that he has linked to above and got everything else I was trying to get coded working except the auto fold side mirrors. I coded the following from the cheat sheet (please note I did not change the settings for closing/opening windows with the keyfob as yet - don't think they are related though but could be wrong).

Open/Close Side Mirror BDC_BODY 3110 ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN nicht_aktiv aktiv
** Also needed for Window via Keyfob or CA BDC_BODY 3110 ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN nicht _aktiv aktiv

I disconnected and re read the ecu values from the car and the above is definitely set to aktiv so not sure what could be wrong. Holding the lock button down for more than a few seconds also doesn't help. Maybe I'm missing something else that I need to code? If someone who has done this successfully or any of the experts can help, would be much appreciated. Thanks.

 

Do Code everything. They are connected.
All the F15 X5 that I've coded all worked. Unless if you don't have the electronic fold side mirror.
The easiest way to find out, if you have a small push button next to the side mirror adjustment left/right selector switch.

 

Can someone explain to me what this means?

Enable Sport Automatic Transmission (SAT)
Enable Launch Control (requires both SAT coding above)

My car is X5 M50d and I have Sport mode on the gear lever or "Sport mode" (sound, chassis and engine - Comfort, Normal, Sport, and Sport+) on the console.

I had Launch control on my X6m, I did not try to see if I have it on M50d.

 

How can I turn the tail lights DRL BMW F15?? Any ideas?

 

for anybody interested to turn off Auto Start Stop function as Default - In BDC_BODY ecu :

TCM_MSA_DEFAULT_OFF = aktiv