Hi Shawn,

I just purchased my first BMW, an F34 328i GT, and I'm loving it! I don't have bluetooth music streaming or USB music though and I'd love to learn how to code the upgrade. I have your PDF instructions, just need the software and cable. I'm a little nervous to mess with it, but I'm a total music guy and would love the album artwork and track selection functionality from my steering wheel. Not sure if it's possible with my smaller iDrive screen (VIN). Thanks!

 

It looks like you most likely have ENTRY Head Unit with Combox. You should be able to get Bluetooth Streaming, but I don;t think Album Art is possible. PM sent.

 

Hi,

I have F25 with

-S6NHA Hands-free with USB interface
-S609A Navigation system Professional

Which if I've understood everything correctly should mean I can enable Enhanced Bluetooth?

I've got my self an E-Sys Ethernet cable - so guess I just need the relevant software to get going?

Is it literally as easy as indicated here: http://www.bimmerfest.com/forums/showpost.php?p=8020396&postcount=7

Also, would this enable BMW Apps over Bluetooth?

Thanks

 

PM sent.

Yes, it is that simple.

No, you will not get BMW Apps over Bluetooth. You will need to use cable.

 

Hello @shawnsheridan!

I have a 14 BMW 328i, I have the combox in the trunk and would like to code the Bluetooth audio feature. I ordered the USB to OBD II cable, would that work or will I need an Ethernet to OBD cable?

I'm using a Windows 10 VM on a Mac, I need some help with the software part. Can you please confirm if I need Esys, the launcher and the psdzdata_lite for this tweak?

I'm following https://youtu.be/xbO4yWIFXoA , can you also please advise if I need to take care of anything else?

Thanks in advance

 

Hello @shawnsheridan!

I have a 14 BMW 328i, I have the combox in the trunk and would like to code the Bluetooth audio feature. I ordered the USB to OBD II cable, would that work or will I need an Ethernet to OBD cable?

USB-OBDII = K+DCAN. Used for E-series
Ethernet (RJ45)-OBDII = ENET. Used for Fxx/Ixx/Gxx-series

 

Hi guys. I have some time reading in the forum and it's really great, a lot of useful information and really good coding stories. Now my question, I have a 125d, 2015 said in papers but vin information says 20130901. I want to unlock my a2dp, I read the vin information on bimmerwork and 6va is not listed, so I understand I have nbt unit but I am not sure, do you know other way to check the head unit without unmounting the panel?
By the way I have no navigation, only hands free bt calls through phone and WhatsApp.
Thank you.

 

No navi = No NBT = No EBT

 

Launcher Premium is no longer supported by tokenmaster, only PRO for which he is requesting a $50 donation to a charity of your choice. Does anyone have any workaorunds? or previous builds that dont require emailing the tokenmaster for activation codes?


Thanks!

 

Launcher Premium is no longer supported by tokenmaster, only PRO for which he is requesting a $50 donation to a charity of your choice. Does anyone have any workaorunds? or previous builds that dont require emailing the tokenmaster for activation codes?

Thanks!

There is no workaround, only paid alternatives like ESysX, that cost more.

Why not just get the new Launcher Pro 3.x version? :dunno:

For the first 5 years, before Launcher PREMIUM came along, we all paid $50 for a 12 month E-Sys token, year after year, and were happy to do it. Making a donation of $50 every 2.5 years to be able to code one's car is dirt cheap by comparison, and certainly more than reasonable, and the money goes to a good cause to boot. It's Win-Win.

 

Enhanced Bluetooth 2018 X3

Hope someone can shed some light. Just purchased a 2018 X3 (G01). Didn't realize you need to order the wireless charging for enhanced bluetooth, so i'm missing it. I have nav.

Can I code for enhanced bluetooth on it? I see S609A, but not 6NH or 6NS.

 

Hope someone can shed some light. Just purchased a 2018 X3 (G01). Didn't realize you need to order the wireless charging for enhanced bluetooth, so i'm missing it. I have nav.

Can I code for enhanced bluetooth on it? I see S609A, but not 6NH or 6NS.

If you have NBT2, add 6NW and VO Code NBT2.

 

Hi Shawnsheridan,

Can you please PM me the link to download e-sys?

 

PM sent.

 

Im trying to code ebt on a 2017 f31 with pro nav, nbt2, idrive 5. I've VO coded both 6ns and 6nw but neither have worked. I now get an office option in settings, but no options to add a second phone bt audio doesn't work.

I've seen a few people with similar issues - does anyone have a solution for this?
TIA


I

 

Hi guys,

i believe this is also feasible for E series? I have an X1 from 2014 with 6NH and would like to change it to 6NS in order to enable enhanced bluetooth option.
May i have the link for the software please?
thank you in advance

 

PM sent.

 

Hi guys,

i believe this is also feasible for E series? I have an X1 from 2014 with 6NH and would like to change it to 6NS in order to enable enhanced bluetooth option.
May i have the link for the software please?
thank you in advance

 

Hi all, I have a 2017 F31 with 606 HU_EntryNav, does anyone know how I can use Bimmer Code to enable Enhanced BT, from 6NH to 6NS. Im new to this so easy step by step or a vid would be great, thanks

 

You can't, with Bimmercode.

 

Ok thanks - I had read lots of conflicting posts on this and wondered as in BimmerCode I have the options under advanced to change the lines.


Sent from my iPad using Bimmerfest

 

hi
Can anyone help with a working version of e-sys ? i have a VM installed but when connected does not see the correct car, I have a 2013 320d xdrive and when connected brings up f20 f25 etc .

Thanks

 

PM sent.

 

hi
Can anyone help with a working version of e-sys ? i have a VM installed but when connected does not see the correct car, I have a 2013 320d xdrive and when connected brings up f20 f25 etc .

Thanks

 

Hi

Read through this whole thread and learned loads, please could someone help me with an up to date version of e-sys please?

Cheers!

 

Hi

Read through this whole thread and learned loads, please could someone help me with an up to date version of e-sys please?

Cheers!

PM sent.

 

Legend, thank you!

 

Hi gang,

Can anyone advise if the following spec would allow EBT to be coded?

Its an F31 from the end of 2012

Vehicle options
L812A National version England / Ireland

S1CAA Selection of COP relevant vehicles

S205A Automatic transmission

S230A Extra package, EU-specific

S249A Multifunction f steering wheel

S255A Sports leather steering wheel

S258A Tire with run-flat functionality

S2DWA BMW LA wheel, Star Spoke 393

S2PAA Wheel bolt retainer

S302A Alarm system

S316A automatic trunk lid mechanism

S3AAA Roof railing black

S420A Sun protection glazing

S423A Floor mats, velours

S428A Warning triangle and first aid kit

S431A Interior mirror with automatic-dip

S465A Through-loading system

S493A Storage compartment package

S494A Seat heating driver/passenger

S4CGA Interior strips, "satin-silber" matt

S508A Park Distance Control (PDC)

S520A Fog lights

S521A Rain sensor

S534A Automatic air conditioning

S544A Cruise control with brake function

S563A Light package

S575A Supplementary 12V sockets

S5DAA Passenger airbag deactivation

S5DCA Rear-seat headrests, folding

S698A Area-Code 2 for DVD

S6AAA BMW TeleServices

S6ABA Control for Teleservices

S6NHA Hands-free with USB interface

S850A Dummy-SALAPA

S853A Language version English

S880A On-board vehicle literature English

S8KAA Dummy-SALAPA

S8S2A Coding alarm signal

S8S3A Automatic locking when driving off

S8SCA Telematics access request,country-spec.

S8SMA Car ident. number visible from outside

S8TGA Thiefproofing device

S8V1A Label

Thanks all

Jinj

 

Hi gang,

Can anyone advise if the following spec would allow EBT to be coded?

Its an F31 from the end of 2012

S6NHA Hands-free with USB interface

Yes you can

 

Car has bluetooth buddy but doesn't stream audio over it currently.

As its an older car, not sure if this is possible.

You still think so?

 

Hi Shawn,

I am interested in coding EBT on my car, never done coding before want to try. Can you please help me with software.

320i, 2014

Thanks,
Neeraj

 

PM sent.

 

hey

 

hey ich habe champ2 mit combox hab EBT codiert, aber jetzt funktioniert AUX nicht mehr, woran kann das liegen?

 

What did you remove and add to FA to make EBT work?

 

Hi,

Can you please help me? I try to get the Enhanced Bluetooth working on my BMW F31 from 2013 but I get an error when I try to VO code my headunit.

So first I changed the FA from 6NH to 6NL. That went well. Then I try to code the HU_NBT and end up with the following error:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2018/04/11-20:22:52.908
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[HU_NBT - 63] prepareECUforCoding started
[HU_NBT - 63] There was an error during TAL execution, please check the log files.
[HU_NBT - 63] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000ded-003_004_010:
DataGroup ., Function .: More than one condition parameter is active: [., .]
[HU_NBT - 63] finalizeECUCoding started
[HU_NBT - 63] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "24s". [C206]
Abarbeitung beendet

I saw in another topic that "More than one condition parameter is active" means FA has conflict with 2 or more option codes.

How should I resolve this?

One note: My Car is from May 2013 and came from the factory with option 6NH (Standard BT) and the HU_NBT (prof Navi) but I saw a sticker on the physical headunit a later production date: 34 2013.
I think that is week 34, which means August 2013. That would mean that my NBT headunit was replaced when the car was 3 months old. Not sure if this can be related to my error.

Thanks,
Bas

 

Hi,

Can you please help me? I try to get the Enhanced Bluetooth working on my BMW F31 from 2013 but I get an error when I try to VO code my headunit.

So first I changed the FA from 6NH to 6NL. That went well. Then I try to code the HU_NBT and end up with the following error:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

TAL execution started.
ExecutionID=2018/04/11-20:22:52.908
[] prepareTALExecution started
[] prepareTALExecution finished
[] prepareVehicleForCoding started
[] prepareVehicleForCoding finished
[HU_NBT - 63] prepareECUforCoding started
[HU_NBT - 63] There was an error during TAL execution, please check the log files.
[HU_NBT - 63] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000ded-003_004_010:
DataGroup ., Function .: More than one condition parameter is active: [., .]
[HU_NBT - 63] finalizeECUCoding started
[HU_NBT - 63] finalizeECUCoding finished
[] finalizeVehicleCoding started
[] finalizeVehicleCoding finished
[] finalizeTALExecution started
[] finalizeTALExecution finished
TAL execution finished
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "24s". [C206]
Abarbeitung beendet

I saw in another topic that "More than one condition parameter is active" means FA has conflict with 2 or more option codes.

How should I resolve this?

One note: My Car is from May 2013 and came from the factory with option 6NH (Standard BT) and the HU_NBT (prof Navi) but I saw a sticker on the physical headunit a later production date: 34 2013.
I think that is week 34, which means August 2013. That would mean that my NBT headunit was replaced when the car was 3 months old. Not sure if this can be related to my error.

Thanks,

Bas

You need to check FA again. Somehow you must have 2 conflicting codes (6NH, 6NK, 6NL, 6NS, etc.).

 

You need to check FA again. Somehow you must have 2 conflicting codes (6NH, 6NK, 6NL, 6NS, etc.).

Thanks for your help. I have it working. It turned out that I had to change it from 6NH to 6NS. Changing it to 6NL or 6NK returns the error above when coding the HU_NBT

Only album art is not working when I stream music(Spotify) via Bluetooth. This is working when I connect my Iphone via USB.

 

Hi Guys, appologies for post bombing..but just picked up a 63 plate 320d with what i reckon is CIC... had been more interested in getting the m sport etc. and hadn't really done my homework on the infotainment system....so i have BT for phone but not for audio streaming... can do the audio via the aux jack but would prefer via BT if possible... the car has no nav nor combox in the boot... i understand this may be in the head unit but am unable to tell until i get an esys on saturday. Anyway quick question.., if I need a combox to get music over the BT working .. can i just plug one in, there seemed to be a few types, would i need a specific model to work?. coding aside that is..
or ultimate solution would be to also mirror android phone screen to use apps like maps etc again is this possible ?appreciate that be a big rip out and installl again i had read voltages may be different on newer evo units.. apprecaite your extensive knowledge to give me some advice

Cheers
Jake

 

Hi Guys, appologies for post bombing..but just picked up a 63 plate 320d with what i reckon is CIC... had been more interested in getting the m sport etc. and hadn't really done my homework on the infotainment system....so i have BT for phone but not for audio streaming... can do the audio via the aux jack but would prefer via BT if possible... the car has no nav nor combox in the boot... i understand this may be in the head unit but am unable to tell until i get an esys on saturday. Anyway quick question.., if I need a combox to get music over the BT working .. can i just plug one in, there seemed to be a few types, would i need a specific model to work?. coding aside that is..
or ultimate solution would be to also mirror android phone screen to use apps like maps etc again is this possible ?appreciate that be a big rip out and installl again i had read voltages may be different on newer evo units.. apprecaite your extensive knowledge to give me some advice

Cheers
Jake

 

Hello Guys, so i have a 116d ED from 2014 that i would like to enable EBT. I already have bluetooth for telephone calls. From what i have been able to gather, i have the HU_ENTRY and no combox at the boot. Is it possible for me to do this by coding the car?
If yes could you send me the e-sys?

Thanks

 

No. You must have a Combox for EBT with ENTRY Head Unit.