Coding Error - CAS module, CAFD_00000000f-005_024_221

This has been answered maybe a million times. Your psdzdata version is too old.

I searched and didn't get a hit... and I just downloaded v54.0. Is there a newer version?

Did 54.0 work? There is a newer version, at least 54.1. 54.0 should though work, unless your car hasn't been updated recently. There is also other option, if your car still has software from factory: Sometimes at factory they install cafd versions that are not part of any psdzdata version. Solution for this is to inject new cafd via detect caf for swe and then vo-code the module.

I got it used (2 years old, 18k miles) so the code is probably still factory fresh.

54.0 worked fine for everything else. Just not the CAS module.

re: inject cafd... how do I do that? I looked into a the E-SYS user manual (v1.4 from 2007) and it briefly talks about detecting CAF for SWE... can you provide any quick steps? Thanks.

I don't want to run out to my car right now but I found the following. Is this close?

Left-Click on CAS => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on CAS (the ECU itself not the underlying CAFD) => Select CODE.

Click to expand...

tx_trainwreck said:

I was able to start successfully coding my F01 (2013 750i) this week and make a few tweaks. But the most important ones I want are in the CAS module. When I go through the normal steps...

- select the CAFD_00000000f-005_024_221 entry under the CAS folder
- right click and choose [Read Coding Data]

... I get error "File for "CAFD_00000000f-005_024_221 not found (C012)". I didn't get it for any other modules.

Any ideas?

Click to expand...

cafd_0000000f.caf.005_024_221:

https://mega.co.nz/#!Ul5SxJLY!iAkRdLioFfJgjigiqgO02OZaoftzfrASxmljUlSOanE

Copy to CAFD library folder (e.g. C:\Data\psdzdata\swe\cafd).

Thanks Shawn. That file worked fine... no issues. Now I'm working on my last tweak for the FRM module but I'm missing the following file. Can you please send me a link for it? Thanks.

Transaktions-Report: Aktion: Codierdaten lesen
FRM [72] [C996468]
readCPS o.k.
CAFD_0000106D_012_003_012 Fehler:
File for "cafd_0000106d-012_003_012" not found! [C012]

Click to expand...

tx_trainwreck said:

Thanks Shawn. That file worked fine... no issues. Now I'm working on my last tweak for the FRM module but I'm missing the following file. Can you please send me a link for it? Thanks.

Transaktions-Report: Aktion: Codierdaten lesen
FRM [72] [C996468]
readCPS o.k.
CAFD_0000106D_012_003_012 Fehler:
File for "cafd_0000106d-012_003_012" not found! [C012]

Click to expand...

I don't have cafd_0000106d.caf.012_003_012.

You can inject the following replacement CAFD into the ECU, VO Code it, and then you can FDL Code ECU:

cafd_0000106d.caf.012_003_013

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the replacement CAFD from above => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

Afterwards you will be able to FDL Code ECU.

I am also having issues reading my CAS file... The file I can't open using 54.2

Just lots of blank fields ".

CAFD_0000000F_005_025_036.ncd

I also get this error reading ,

CAFD_00000223_013_008_005 Fehler:

CPS read from ECU "ECUId:TRSVC_0x06" failed! [C070]
negative response error:

\\anyone have any ideas?

Replace your cafd_0000000f.caf.005_025_036 in C:\ESysData\psdzdata\swe\cafd with this one, and tell me if you can read and code TRSVC:

cafd_0000000f.caf.005_025_036
https://mega.co.nz/#!YtxHGJDK!LgwWLcZdBVy7C1bl9x7blnqUiai29K9zT6QqPJ3qM0E

Travel4Surf said:

I am also having issues reading my CAS file... The file I can't open using 54.2

Just lots of blank fields ".

CAFD_0000000F_005_025_036.ncd

I also get this error reading ,

CAFD_00000223_013_008_005 Fehler:

CPS read from ECU "ECUId:TRSVC_0x06" failed! [C070]
negative response error:

\\anyone have any ideas?

Click to expand...

This means we all have to say: TokenMaster thank you very much!

mcbum said:

This means we all have to say: TokenMaster thank you very much!

Click to expand...

What does TokenMaster have to do with this issue?

It is not issue. FDL coding is over.

mcbum said:

It is not issue. FDL coding is over.

Click to expand...

Yes, this is true, but what does that have to do with TokenMaster?

Can you guys tell a bit more about this "fdl coding is over" thing?

Its programs and public actions, he contributed to the fact that BMW has canceled this feature.

He? Who? Tokenmaster? Sorry I don't understand you.

Tokenmaster

Ok. BTW TokenMaster was not the first person to publish token generator for free, he actually didn't want to publish it because he said that BMW will likely introduce new protection systems if generator is released. So don't blame him.