Use E-Sys. PM sent.

 

Hey bro, could you please lead me through the steps of coding a used ekpm to my car? A friend of mine already tried it, but i keep getting cel with “fuel supply” and the codes are saying something with no or low voltage to ekps. The donor car is a 530d 2010 that has been in a bad accident that possibly cut off the fuel. My car is a 2014 535i and my current ekpm is still working, but im having some problems with fuel cuts (i guess) and thats why i wanted to try another ekpm to see if that is my problem. With my current ekpm i have no codes

 

Hola, tengo que instalar un nuevo módulo de bomba EKP porque el antiguo se quemó. Es un bmw 528i F10. Tengo VXDIAG, ¿con qué puedo programarlo?
Muchas gracias

 

Use E-Sys. PM sent.

 

Hello shawn when you get time could you send me the program I'm trying to replace my ekpm3 and here that it requires coding

 

PM sent.

 

Hi, I’m fairly new here and in need of instruction of how to program an EKPS in an M235I 2016. Would someone please help?

 

PM sent.

 

Hello! I have a ‘14 335i and need to reprogram my EKP module. I do have E-Sys yet i’m fairly new to it so I wouldn’t know how to go about prgramming my module. Any help? Thanks.

 

E-Sys - Flashing Guide v.1.0.1.pdf:

MEGA

MEGA provides free cloud storage with convenient and powerful always-on privacy. Claim your free 20GB now

mega.nz

 

I am replacing the EKPS module in my 2011 550xi with a used EKPS module and need help programming it. Is there a guide / software I can use for this

 

What is car VIN (last 7)?

 

c785319

 

Ok, you are lucky as your car has no EPS FSC Code. I would install Donor EPS, Inject CAFD and VO Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read (ECU) => Left-Click on EPS ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom one) => Select OK => Right-Click on EPS (the ECU itself not the underlying CAFD) => Select CODE.

 

Thank you for your response. I have e-sys 3.18 will that work or do I need a newer version. Also, I have not used e-sys in over 5 years if there is a beginners guide how to for this, I would really appreciate it.

 

Update. PM sent.

A Guide? I wrote above exactly what to do.

 

Thank you!

 

Is EPS installed?

Do you use Read ECU not Read VCM?

 

it is. I replaced the Ekpm Fuel pump control unit and the car is running now. Not sure if I have to program it at all at this point. The steps I am doing on E-sys are Read Vehicle Order -- then go to the right hand side to SVT Actual and click Read ECU.

 

No idea. If you install EPS in car, and its connected to BUS, it should appear in ECU Tree with Read (ECU).

 

Hi Shawn,
I bought an ET3 stage 2 EKPM and need help coding it. They have instructions using protools to change the VIN to match the cars VIN however I did not have these options available to me on protool. Current reading of the EKP's VIN is 0000000.
I went onto Esys and Injected the latest CAFD as per your instructions but that has not helped. Would you know how to adjust the VIN value of the EKP using E-sys?

 

Hello my ekps has an intermittent stall during the day when it’s hot but at night the problem doesn’t come up. I’ve read that I need E-Sys. But I was wondering if I had to get the latest EKPS from FCP Euro 16147411596 or I could get a donor one with a model fairly newer than mine just not the latest and recode it.

 

Wondering if I can get that info as well, thank you

 

Sorry I should have elaborate more, I know you outlined the steps above on how to code the module but is there a more detailed step by step guide?

More detailed then this?

Ok, you are lucky as your car has no EPS FSC Code. I would install Donor EPS, Inject CAFD and VO Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read (ECU) => Left-Click on EPS ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom one) => Select OK => Right-Click on EPS (the ECU itself not the underlying CAFD) => Select CODE.

No, not posisble.

 

Sorry about that, still learning how to navigate the forum. Thank you for the info

 

 

Hello, Shawn! I replaced my EKPS module on my 320 f30 2014 and I need help to reprogram. I'm seeing some step by step here on the forum to do by e-sys, but I don't know if I can use it in my car, or if there is any specific path for my model. My VIN is F387436. Thank you for your time.

 

E-Sys - Flashing Guide v.1.0.1.pdf:

MEGA

MEGA provides free cloud storage with convenient and powerful always-on privacy. Claim your free 20GB now

mega.nz

Understand that for a non factory fitted ECU, its I-Step Shipment is most likely not the same as the car's I-Step Shipment. The correct I-Step Shipment is one where the ECU being flashed has HWEL in svt_soll that is Black, not Red / Blue.

So after you calculate SVT Target (SVT_soll), check the box that says "HW-IDs from SVTactual" and then Save it. If HWEL is Black only, no Red / Blue HWEL, then you can proceed to flash it.

 

Hi, I updated my ekpm3 to an ARC Terminator. I’m wondering whether I have to change the individual parameters to allow for more amperage/disable safeties or just update the module to code the new ekp module. I see the ekpm2 dme (which includes ekpm3 in the description afaik). Thank you in advance.

 

Hi, I updated my ekpm3 to an ARC Terminator. I’m wondering whether I have to change the individual parameters to allow for more amperage/disable safeties or just update the module to code the new ekp module. I see the ekpm2 dme (which includes ekpm3 in the description afaik). Thank you in advance.

Hi, can I please please get some help. Also new at coding and have esys installed and can connect to car but no idea to code my ARC Terminator EKPM. Is anyone will to remote connect and do it for me? This will be so mich appreciated

Hi, I updated my ekpm3 to an ARC Terminator. I’m wondering whether I have to change the individual parameters to allow for more amperage/disable safeties or just update the module to code the new ekp module. I see the ekpm2 dme (which includes ekpm3 in the description afaik). Thank you in advance.

Hi, can I please please get some help. Also new at coding and have esys installed and can connect to car but no idea to code my ARC Terminator EKPM. Is anyone will to remote connect and do it for me? This will be so mich appreciated