I am also wondering if NGHB coding is possible on g30s with full LED headlights option.

 

I have some promises but no one as far as I know can code G30 -yet!

 

I can code a G30.

 

Great! By any chance will you be in NY in the near future? I'm sure we can work something out for your trouble.

 

I am still out of the country at the moment, but return shortly to the opposite coast. I can code remotely as well.

 

Hello!

Coding a G30 is an easy thing. A little bit different to F1x due to other ECUs, bot nothing more. Do delete the start/stopp and DVDinMotion (>63 km/h) is a little bit tricky, that's all.

CU Oliver

 

I'm surprised to hear it's easy considering I'm having a tough time finding someone local in NY that can do it

 

Hello!

For ECE cars the MSA is not set to memory. FDL-code the BDC with MSA set to memory will not have any effect - the same when you code it with OMSA.

BMW stopped the memory setting for the MSA - greetings to VW.

The way to switch it off is now different from the old cars.

CU Oliver

 

How to code MSA on G30?
VW we need to update the voltage limit, but F series allow memory, G changed it?
Any cheat to coding it?
I tried to coding Accoustical Locking, showed on iDrive but can't enable it...
Tks

 

MSA is GPS locked in some regions.

Acoustic lock requires 302 Alarm.

 

So whats the trick with ASS on ECE cars? Add OMSA and deactivate GPS detection?

If its not public, please PM.

 

Hello!

No! Think in another direction. What does the MSA and what can be also responsible for it?

CU Oliver

 

If we are talking about turning off Start/Stop by default, then I am guessing its related to the Engine temperature and/or Voltage. Overwriting the BDC input to a fixed low temperature/voltage or just modifying the threshold.
Or... somehow coding the vehicle to start in Sport mode by default, but as far as I know, only Comfort and Economy can be set for default values.

Or are we talking about MSA Memory ?

 

I do not know how to overwrite locational restriction. I just know that it is unwise to write OMSA to VCM as it can void warranties.

 

Does Sport Mode or Sport+ in BDC equipped vehicles feature Start/Stop off at start by default?

 

North American vehicles have MSA (ASS) memory, so vehicle remembers preference (ie shutdown setting).

Sport(+) mode does have ASS disabled.

 

Ok, so that is one option how to get around it. I just bought the BimmerCode IOS app which offers the option to turn on MSA_Memory in G series. The app also has the option for VIM on NBT EVO up to ID6

 

Memory is not an issue. Default off is. I saw that it offers VIM as well.

 

Hello!

Shut off the MSA totally in a G30 or VIM is not a problem at all. MSA set to memory is not possible yet.

CU Oliver

 

Then, I guess we need to trade codes because MSA memory is easily done.

 

The BimmerCode app does offer MSA memory in G series. When I will have the chance, I am gonna investigate how it does that.

 

I just coded the MSA memory today, and it was working at least inside my workshop. Also RPA activation was not a problem. What I am interested about is the rear lights with DRL, as I dont have details about BDC2 cafd files yet.

 

I have equally had no issue on DDE and DME.

What do you mean you do not have BDC details?

 

I dont have untrimed files for S15A. I replaced my laptop and I have not been able to contact Tokenmaster in last 1,5 months, to activate pro launcher. I dont know if it can translate the cafd files, premium launcher definitely cant (properly).

 

And NCD / CAFD Tool?

Depending on desired function and as long as you do not need some of the now unmapped BDC_Body ECU's since P3.60.1, you can use NCD / CAFD Tool or premium launcher.

 

Yes, I am very well aware of the tools available. With a relatively quick look, I could not find lamp mapping parameters. I must check again.

 

You mean the ones in FLM?

 

No, I believe these are the headlight modules.

 

They are. For which lamp's are you looking?

 

Rear lights.

 

Those, if I recall correctly, are in some of the unmapped BDC sections of 2017 firmware. There are some E-words that may help locate (eg TAHL).

 

Yes, as I said . Thanks for the option codes, I will check them when I get to my workshop.

 

Good luck.

 

Msa

Sorry guys but I didn't got the tip for MSA...please any way to set it to remember last function or default off?
Tks

 

Well guys, i also tried to coding MSA today but with the cheat code launcher it says Gps locked and is still testing, but when i apply it i get a error message about it didn't write the fdl. My question to almaretto is: is there already a solution for it? And also for the VIM above 63km/h?

 

You are using an old Cheat Code version. Update:

Coding: Getting Started Guides, Tips, & Cheat Sheets

VIM can be unlocked above 63 kph, but only with commercial solutions.

 

Okey thnx! What do you mean with commercial solutions? Do i need to buy something else or how do you mean it?

 

I can't seem to get the structure of the G30, currently only manage to find TCM_MSA_MEMORY in DME_BAC2.

Could somebody point me in the right direction on where to look?? Have checked the coding beginners topic, installed cheatsheets (used Almaretto since that looked like to most up-to-date one) but somehow can't find the proper modules that Almaretto showed in post #39

Any help greatly appreciated

 

I can't seem to get the structure of the G30, currently only manage to find TCM_MSA_MEMORY in DME_BAC2.

Could somebody point me in the right direction on where to look?? Have checked the coding beginners topic, installed cheatsheets (used Almaretto since that looked like to most up-to-date one) but somehow can't find the proper modules that Almaretto showed in post #39

Any help greatly appreciated

Those in post #39 are from BDC_Body. You should see ECU's in SVT tree.

 

Honestly, I don't have a clue....looking at the F15 sheet and checking if that's available on the G30

Ok. G030 does not have ICM. You will have Driver's Assist functions in SAS. Drive mode is in BDC_Body.

 

Ok. G030 does not have ICM. You will have Driver's Assist functions in SAS. Drive mode is in BDC_Body.

Thanks for clarifying, I just have to have some patience when the rest gets figured out...what thread could I best monitor for that?
There isn't a G30 cheatsheet is there?

 

I saw in another thread that NGHB coding is possible for G30. Does it differ from the coding done for NGHB for F15? I was able to find a pretty detailed breakdown for F15.

 

It is absolutely different for the G30. It is even different between G12 and G30.

F15 uses FLE (CAFD_000024C3). G30/G12 use FLM (CAFD_0000222D).